Nord Stage 4 handleiding
Handleiding
Je bekijkt pagina 29 van 76
6. SYNTH | 29
FM-I (FM Inharmonic): Provides the same algorithms as the FM-H
mode, but with a mostly inharmonic relationship between the modulator
and the carrier, suitable for more dissonant and experimental timbres.
Wave: Complex, digital waveforms covering a wide range of tonal
characteristics.
The middle Category dial is used for choosing a category within the
specified oscillator Type and the right Waveform dial selects the specific
waveform to be used. Use the LIST command (Shift+Waveform dial) to
display a list view of the waveforms or samples in your current selection.
ANALOG
PURE
The Pure category contains a selection of waveforms which are not
affected by the Osc Ctrl parameter:
Sine
Triangle
Saw
Square
Pulse 33
Pulse 10
White Noise
SUB OSC
The Sub Osc category contains a selection of dual-oscillator waveforms
where the OSC CTRL parameter determines the mix of the fundamental
and a phase locked sub oscillator waveform.
Square Sub Saw: A sawtooth waveform with a square waveform one
octave below.
Pulse Sub Saw: A sawtooth waveform with a 25% pulse waveform two
octaves below.
Sine Sub Saw: A sawtooth waveform with a sine waveform one octave
below.
SYNC
“Oscillator Synchronization” involves using the signal from one oscillator
to restart another oscillator. When sync is applied, the basic pitch of
Oscillator 1 is locked to that of Oscillator 2 (the “sync” oscillator). As
the relative pitch of the synchronized oscillator is varied, this will be
perceived as a dramatic change in timbre.
With Oscillator Sync, it can be useful to have the OSC CTRL amount
modulated from one of the Morph sources, or by the Oscillator
Envelope. This generates a signal with continuously varied harmonic
content.
The “Chop” waveforms in this category apply a sawtooth or square
“window” to the synced waveforms which gives a unique and
comparitively soft, vocal quality to the produced sound.
Sine
Triangle
Saw
Square
Pulse 33
Pulse 10
Chop Saw
Chop Saw 2
Chop Square
SHAPE
The Shape category contains waveforms where the Osc Ctrl parameter
determines the shape.
Osc Ctrl = 0 Osc Ctrl = 5 Osc Ctrl = 10
Triangle
Saw
Square
Half Sine
Parabolic
l The Square waveform can be transformed from a square (50%
pulse) to a very narrow pulse wave, making it suitable for Pulse
Width Modulation (PWM) sounds, using the LFO or Oscillator
Envelope to modulate the Osc Ctrl parameter.
SHAPE SINE
Waveforms in the Shape Sine category can all be gradually transformed
from a pure sine wave to the selected waveform, using the Osc Ctrl
knob.
Osc Ctrl = 0 Osc Ctrl = 5 Osc Ctrl = 10
Pulse
Saw
Square
Squeeze
Fold
ESaw
ESquare
Bekijk gratis de handleiding van Nord Stage 4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Stage 4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10906 MB |
