Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 63 van 291
NORD MODULAR G2 V1.4x 5. The Editor application: Making your first patch
Page 63
P
ATCH
WINDOW
SPLIT
BAR
Click-hold on the Patch window split bar and
drag up or down to resize the two Patch
sections, the Voice and FX Areas. Click on the up arrow button to the left in the bar to show only the
Voice Area, and on the down arrow button to show only the FX Area. Click on the double arrow button
to place the split bar on the previous split position. Press V on the computer keyboard to toggle between
the current split position and viewing only the Voice Area. Press F on the computer keyboard to toggle
between the current split position and viewing only the FX Area.
MAKING YOUR FIRST PATCH
C
REATING
A
NEW
EMPTY
P
ATCH
Click on the N
EW
button. Modules that were shown on the screen will disappear and there is a
new blank Patch.
I
NSERTING
AN
O
UTPUT
MODULE
Click on the I
N
/O
UT
Module Group selector. Click on the leftmost Module Icon named 2-OUT, hold
the mouse button pressed and drag the Module Icon onto the grey background of the Voice Area.
Output modules connect signals in a Patch to the physical LineOut and Headphone connectors on the
back of the G2. So, its a good idea to always start with an Output module to be able to hear sound while
patching.
I
NSERTING
A
S
OUND
S
OURCE
MODULE
Now you are going to insert a module that will actually generate sound. The module that is going to be
inserted is named an Oscillator and will basically be responsible for the pitch of the sound. Click on the
O
SC
Module Group selector and hold the mouse over the Module Icons until you find a Module that is
named O
SC
D
UAL
. Drag this module onto the Voice Area background. Lower the volume of your
amplifier or set the Master Level on the G2 to very low, as you are going to connect the output of the
OscDual module to an input on the 2-Out module, which will immediately output sound on the
LineOut1 connector or the headphone.
Click with the mouse on the squared red connector in the lower right corner of the OscDual module and
keep the mouseknob pressed. Drag the mouse pointer to the left circular red connector named ’L’ on the 2-
Out module and release the mouseknob there. This will draw a cable between the OscDual output and
the 2-Out left input. If all went well you should hear a bright tone from one of your speakers.
Click again on the squared red connector on the
OscDual module and again drag, but now to the
circular red connector named ’R’ on the 2-Out module.
After this you should hear the tone come out of the
other speaker as well. Adjust the Master Level knob on
the G2 or your amplifier volume knob for a
comfortable sound level.
Play some notes on the keyboard and hear how the
OscDual automatically follows the keyboard.
Oscillator modules will follow the keyboard by default.
Notice that squared connectors on modules are outputs, and
that circular connectors are inputs.
Output connector Input connectors
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
