Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 59 van 291
NORD MODULAR G2 V1.4x 5. The Editor application: Toolbar
Page 59
TOOLBAR
P
ERF
: (
NAME
)
When the connected synth is in Performance Mode, or when the synth is
disconnected, you can enter a name for your current Performance by clicking
in the Perf box, typing in a name and pressing Enter. When the connected synth is in Patch mode, this
box is disabled for editing.
M
ASTER
C
LOCK
Set the tempo for the Master Clock in BPM (Beats Per Minutes) by clicking the
arrow buttons. Start and stop the Master Clock by clicking the Run button. Note
that the Master Clock settings affects Patches in all four Slots in the synth. If the Master Clock receives
external
MIDI
Clock (see “Synth Settings {Ctrl-G}” on page 120), the display box background will turn
red and the current
MIDI
Clock rate will be displayed. When synched to external
MIDI
Clock, the tempo
arrow buttons are disabled as well. When the G2 system is sending
MIDI
Clock over the
MIDI
OUT
connector the Run button will transmit
MIDI
Start/Stop commands.
S
LOT
BUTTONS
You can give a Slot the focus for editing by clicking on the Slot button. The window that
contains the focused Slot/Patch will move to the foreground in the Editor application.
The focused Slot has a white frame around it. Note that only one Patch can be focused in the Editor at
the same, so you can only edit one Patch at a time. To edit another Patch in another Slot give that Slot
the focus by clicking on its Slot button.
You can activate/deactivate several Slots on the same instrument by Shift-clicking on the corresponding
Slot buttons. If several Slots are active, this is indicated by the blue Slot buttons. If you want to change
the Keyboard Assign settings (to select which Slot(s) should be controlled from the G2 keyboard), Ctrl-
click the Slot button(s). All slot buttons that have a red line on top (the keyboard indicator) of them will
follow the keyboard, activated slot buttons that do not have a red line will only follow
MIDI
.
C
ONNECTION
INDICATORS
Here, the connected Nord Modular G2 synths are visible. The name is shown in the
box to the right of the Slot buttons. Connecting or disconnecting the
USB
cable will
make the connection indicator(s) automatically appear or disappear.
When editing more than one G2, the names of the connected synths will appear from left to right in
alphabetical order in the toolbar. Click on the Slot button next to the name of another connected G2 to
start editing the patch in the Slot on the other synth.
P
ERF
The Perf button indicates if the connected synth is in Performance Mode or not. Performance
Mode will group the four Slots together, leaving Performance Mode will ungroup the Slots. Click
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
