Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 51 van 291
NORD MODULAR G2 V1.4x 3. Working with the synth: Performances
Page 51
2. Press S
TORE
again. The
LED
continues flashing. Select memory location by turning the R
OTARY
D
IAL
. Switch between Banks 1-8 by pressing the U
P
/D
OWN
N
AVIGATOR
buttons. As you scroll
through the memory locations, you can see the Performance names in the D
ISPLAY
. This prevents
you from overwriting a Performance that you want to keep.
3. Press S
TORE
again to store your Performance. (To cancel the operation, press
ANY
OTHER
button.)
The Patches you use in the Performance Slots are saved complete with all parameter settings,
Keyboard Split info and Parameter Pages (also Global) configurations within the Performance
itself, when the Performance is saved. The above point means that there is no need to store the
Patches separately. As soon as you save the Performance, all Patches that are used in the Performance
are also saved within the Performance itself. This also means that if you later change any of the original
Patches while in Patch mode, the Patches stored in the Performances are not affected in any way.
And if you later make changes to the Patches in the Performance, this will not affect the original Patches
saved in the Patch memory banks.
So, when a performance is saved, any links to the original Patches will be broken. When you think about
this deeply, you will realize that this is exactly what one would want.
E
XTRACTING
P
ATCHES
FROM
A
P
ERFORMANCE
As stated earlier, the Patches used in the Slots of a Performance are not references to Patches stored in
the Patch memory banks, but separate Patches that only exist within the Performance itself. You will find
several unique sounds in the factory Performances; sounds that you will not find in any of the internal
Patch memory banks. You may want to extract such a Patch from a Performance to play it on its own,
and/or to save it as a single Patch in the Patch memory. See also “Performance Mode” on page 28.
E
XTRACT
A
P
ATCH
AND
SAVE
IT
1. Select the Performance containing the sound you want to extract.
2. Press S
HIFT
together with the P
ERF
M
ODE
button to exit Performance mode (Performance button
LED
dims). See also “Copying Patches between Patch and Performance modes” on page 28.
3. Press the S
LOT
button to activate the Slot (A
CTIVE
S
LOTS
/F
OCUS
LED
is flashing) containing the
desired Patch.
4. Press S
TORE
. The
LED
above the S
TORE
button starts flashing
5. Select Patch memory location by turning the R
OTARY
D
IAL
. Switch between Banks by pressing the
U
P
/D
OWN
N
AVIGATOR
buttons. As you scroll through the memory locations, you can see the
Patches in the D
ISPLAY
. This prevents you from overwriting a sound that you want to keep.
6. Press S
TORE
again to store your Patch. (To cancel the operation, press a S
LOT
button.) The Patch is
now stored as a single Patch.
E
XTRACT
A
P
ATCH
,
RENAME
IT
AND
SAVE
IT
1. Select the Performance containing the sound you want to extract.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
