Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 43 van 291
NORD MODULAR G2 V1.4x 3. Working with the synth: Working with Slots
Page 43
R
ENAME
A
P
ATCH
Renaming a Patch is the same as saving the Patch with a new name to the same memory location. Just
follow the instructions in the paragraph “Storing with new Category and/or new Patch name” on page 40
and select the same memory location.
D
ELETE
A
P
ATCH
Deleting Patches from the internal memory of the synth can only be done from the Editor. Please refer
to “Delete a Patch” on page 88.
WORKING WITH SLOTS
A
CTIVATE
SEVERAL
S
LOTS
Due to the Sound engine architecture of the Nord Modular G2, which always tries to optimize the Patch
Load and voice allocation resources, there are some things to bear in mind:
In live and sequencing situations you may want to
quickly (without any silence) switch between Patches
by simply accessing another S
LOT
. In order for the
Sound engine to “prepare” for this, it has to recalculate
the entire Slot configuration in advance. Therefore,
you need to activate all the Slots you plan to use, with
their Patches loaded, in advance.
Activate the Slots you want to use by holding down the
S
HIFT
button and pressing the S
LOT
button(s) you
plan to use. The A
CTIVE
S
LOTS
/F
OCUS
LEDS
for each active Slot will light up, indicating they’re used
in the total Sound engine calculation. The
LED
for the currently focused Slot will flash to indicate it’s
selected for editing. Now, when you press another S
LOT
button to play another active Patch, there will
be no silence since the Sound engine has already recalculated the entire Slot configuration. If you switch
between Slots which haven’t been previously enabled with the ActiveSlots/Focus function, the Sound
engine has to recalculate every time you change Slot and thus cause a brief moment of silence.
L
AYERING
P
ATCHES
First of all you have to activate the Slots you plan to
use as described above. Then, simultaneously press the
S
LOT
buttons containing the Patches you want to
layer. Alternatively, double-click the S
LOT
buttons,
one by one, to add them to the layer. The K
EYBOARD
A
SSIGN
LED
for each selected Slot in the layer will
light up. The A
CTIVE
/F
OCUSED
S
LOTS
LED
for the
currently focused Slot will flash to indicate it’s selected
for editing. The Patches in the active Slots will now
sound when you play the keyboard or send
MIDI
Note
data on the
MIDI
IN
on the Global
MIDI
Channel (see “MIDI Glob Ch |Sy” on page 31). Change focused
Slot by pressing another active S
LOT
button. Deselect a Slot from the layer by double-clicking the S
LOT
button you want to exclude from the layer. (See more about layering Patches in “Performances” on
4:36 Synth
Dream synth
4:36 Synth
Dream synth
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
