Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 18 van 291
1. Introduction: G2 Basics NORD MODULAR G2 V1.4x
Page 18
D
ISPLAY
shows the memory bank location from where the Patch was recalled, plus the name of the
Patch as well as a possible Sound Category selected for the Patch.
P
LAYING
MULTITIMBRALLY
The S
LOTS
can receive
MIDI
information on separate
MIDI
channels, making the Nord Modular G2 up
to 4 part multitimbral. If you want to use the G2 multitimbrally, you first have to load the Patches you
want to layer into individual S
LOTS
. Hold down S
HIFT
and press the S
LOT
buttons you want to include
in the multitimbral configuration. Then, simultaneously press the S
LOT
buttons for the S
LOTS
you want
to play by the G2 keyboard.
One of the active S
LOTS
has its active
LED
flashing, this is the focused slot, the slot that is ready for
optional editing. You can change the focused S
LOT
by pressing the corresponding S
LOT
button of
another active S
LOT
. To deactivate and reactivate S
LOTS
in a multitimbral setup, hold S
HIFT
and the
desired S
LOT
button(s). The M
AIN
D
ISPLAY
shows the memory location and the name of the Patch as
well as the Sound Category for the focused Patch.
T
IP
! If you don’t use a slot for play by the keyboard or play by incoming
MIDI
you should deactivate this
S
LOT
to allow for more voices in the other S
LOTS
.
P
ERFORMANCES
A multitimbral setup of Patches in the four Slots can be stored as a P
ERFORMANCE
. Basically a
Performance groups up to four Slots with their Patches together, with the individual keyboard split and
zone settings for each Slot. By recalling a Performance which was saved earlier, the complete setup of all
four Slots and their Patches is immediately recalled. You can go into and out of Performance Mode by
just one single pushbutton. Storing a P
ERFORMANCE
will store all four Slots, including what is in the
inactive Slots.
P
ERFORMANCES
have their own memory banks, separate from the memory banks where Patches are
stored. This means that the Patches which are saved in a P
ERFORMANCE
loose their relation to their
original Patch when they are saved in a P
ERFORMANCE
memory bank. So, changing a Patch in a
P
ERFORMANCE
will not change the original Patch stored in one of the Patch memory banks. This
relieves you from keeping track of any changes you make to the Patches used in Performances.
S
PECIAL
FEATURES
IN
P
ERFORMANCES
The idea of a Performance is that it contains ‘as much as possible’ of what you need to perform a song,
and you can recall all this ‘at the push of a button’. A Performance in the Nord Modular G2 system
doesn’t necessarily have to be just four layered/split Patches. It can also be four individual patches that
you use in different parts of the song. Or a sequenced patch plus a patch which you use to play along
with the sequence. Or three patches you play on the keyboard plus a patch controlling other equipment
by using the
MIDI
OUT
features of the Nord Modular G2. Or one patch you play from the keyboard plus
three patches played by an external
MIDI
sequencer device.
The flexible routing possibilities within the Nord Modular G2 system make it possible to internally route
both audio and
MIDI
between Patches, which can make a P
ERFORMANCE
a really powerful
configuration. Imagine a Patch which controls another Patch in another Slot by sending it
MIDI
information. The four ‘inter-slot’ Audiobusses make it possible to have, for example, the audio output
signals of three Patches in three Slots routed to a “global” audio Effects Patch in the fourth Slot, and
additionally use the four Line In audio inputs, routing to the same or different audio Effects.
Performances can be used and configurated in many different ways, for many different musical purposes
and for many different musical styles.
Recalling a Performance from the G2 Performance memory banks is virtually instantly. When stored on
the computer P
ERFORMANCE
-files will have the extension *.
PRF
2.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
