Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 15 van 291
NORD MODULAR G2 V1.4x 1. Introduction: Welcome!
Page 15
1. INTRODUCTION
WELCOME!
Thank you for choosing the Nord Modular G2 synthesizer and welcome to the fascinating world of
modular synthesis. Prepare yourself for a journey where your creativity can reach new levels, in a way that
has not been conceivable with synthesizers before (except with the previous Nord Modular family). As
you will find out in a few minutes, the Nord Modular G2 manages to go where no modular synthesizer
has ever gone before.
ABOUT THE NORD MODULAR G2 SYSTEM
The Nord Modular G2 system consists of two parts: the synthesizer, which will be named the synth or G2
from now on, and the editor software, which is named the Editor. The G2 hardware itself is a polyphonic
MIDI
synthesizer, the Editor is used to upload the synth with different sounds which were stored on a
computer or to create sounds yourself. You will find the Editor software on the CD that is included in
the back of this manual.
The Nord Modular G2 system comes in three different hardware models:
• The basic Nord Modular G2 with a three-octave keyboard, Pitchstick and Modwheel
• The large Nord Modular G2X with a five-octave keyboard and the G2 expansion board fitted as
standard plus two extra Global ModwheelAftertouchs plus a goose-neck dynamic microphone
• The 1U high 19-inch rack mountable Nord Modular G2 E
NGINE
, offered as a G2 system computa-
tional engine without any panel controls
ABOUT THIS MANUAL
Every time this manual wants your attention to an object on the synth panel, the name of that object will
be printed
LIKE
THIS
, e.g. ‘press the S
TORE
button’. The
LCD
displays on the G2 synth are always
referred to as the D
ISPLAYS
(M
AIN
OR
A
SSIGNABLE
) and the computer monitor is always referred to
as the ‘screen’. Whenever there is a reference to the ‘keyboard’ it means the three or five octave keyboard
on the synth or to any incoming
MIDI
notes to the synth. The parts of the manual that describe operation
from the synth frontpanel do not apply to the rack mountable Nord Modular G2 Engine. Since the Nord
Modular G2 Engine lacks the hardware user interface from the other G2 family models, it has to be
programmed entirely from the Editor! Therefore, if you have the Nord Modular G2 Engine, please refer
to the chapters that describe operation from the Editor.
R
EADING
THE
MANUAL
IN
A
DOBE
A
CROBAT
R
EADER
This manual is also available as a PDF file. It can be downloaded, free of charge, from Clavia’s web site
at http://www.clavia.se. When reading the manual as PDF file, you will need Adobe Acrobat Reader 4.0
or later. This program can be downloaded, free of charge, at http://www.adobe.com.
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
