Nord Modular G2 handleiding
Handleiding
Je bekijkt pagina 140 van 291
11. Updating the Synth OS: Calculation order for the modules NORD MODULAR G2 V1.4x
Page 140
11. UPDATING THE SYNTH OS
Note! If you received a brand new Nord Modular G2 or G2 Engine, the latest operating system
is already installed from factory. If so, there is no need to update the synth.
If you need to update the OS in the synth, do like this:
1. Make sure the
USB
Driver and Editor are properly installed as described earlier in this chapter.
2. Power on the G2 synth and connect the
USB
cable between the synth and computer.
3. Make sure the G2 Editor is
NOT
running.
4. Open the ‘Modular Synth Updater’ in the Programs|Nord Modular G2 folder in the Start menu of
the computer and click the Update button to complete the OS update. As the update proceeds, the
different stages are shown in plain text in the G2 Main Display. On the G2 Engine, the different
LED
s show the status of the update according to the following:
5. When the G2 synth has started up with the new OS you can exit the Synth Updater program and
start the G2 Editor.
Note! If the Synth Updater program shouldn’t recognize
the connected G2 synth for some reason, even though
the
USB
Driver has been properly installed, you may have
to enter Update Mode manually in the synth. On the
Nord Modular G2, hold the S
TORE
+P
ERFORMANCE
M
ODE
buttons and power on the synth.
On the G2 Engine, press the “hidden” button inside the
hole to the right of the G2 logotype and power on the
synth. First, the
MIDI
LED
lights up, then the
USB
LED
lights up and finally both
LED
s light up. Then, both
LED
s
go off and the synth goes into “Update Mode” as
indicated by the slowly blinking
MIDI
LED
. Now, you can
run the Synth Updater program as described above.
1. Receiving new OS
via
USB
:
MIDI
LED
is blinking
slowly.
USB
LED
is flashing
2. Erasing old OS
and storing new
OS in memory:
MIDI
LED
and
USB
LED
are flashing
alternating.
3. Starting new OS
and reverting to
normal operation:
Both
LED
s go off and
then the
USB
LED
is
lit until you quit the
Synth Updater pro-
gram.
Current OS v1.10
Ready to receive
Update Mode button
Bekijk gratis de handleiding van Nord Modular G2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Modular G2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 60689 MB |
