Nord Lead 2 handleiding

114 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 70 van 114
Page 70 MIDI
5. Use the Program Up/Down buttons to select one of the following control functions:
6. After you have made your choice, press Store again.
You return to the “t” display.
7. Use the Program Up/Down buttons to select a control amount value (“of” or “1” to “7”).
This value (shown to the right in the display) determines how much the assigned parameter should be
affected by a received maximum aftertouch value.
If you don’t want the slot to be affected by aftertouch messages, select amount value “of”.
8. If needed, repeat steps 3 to 7 to set aftertouch assignment for the other slots.
9. Press Shift to exit the Special menu and return to play mode.
Program Change
The descriptions below are only true if transmission/reception of Program Change messages is activated,
see page 61.
When you select a new Program for a slot, a Program Change message is transmitted via MIDI, on the
slot’s MIDI Channel.
Likewise, if a Program Change message is received on a certain MIDI Channel, all Program slots set to
that MIDI Channel will switch to a new Program.
When you select a new Performance, a Program Change message is transmitted on the Global MIDI
Channel. For information on how to set the Global MIDI Channel, see page 62.
When a Program Change message is received on the Global MIDI Channel, a new Performance is select-
ed.
If the Global MIDI Channel happens to be set to the same number as one of the Program slots, the Per-
formance takes precedence. That is, Program Change messages on this MIDI Channel will select Perform-
ances, not Programs.
Display shows: Aftertouch assigned to:
LFO 1 Amount.
LFO 2 Amount.
Filter Cutoff Frequency.
FM Amount.
Oscillator 2 Pitch.

Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkNord
ModelLead 2
CategorieNiet gecategoriseerd
TaalNederlands
Grootte11965 MB