Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 66 van 114
Page 66 Shift Functions
14. Press Shift again to return to “normal mode”.
If you play the keyboard now, you will not get any sound, because the Cutoff is all the way down, and
the Filter envelope is no longer triggered by the keyboard.
15. Set up your sequencer to play a simple repeating note pattern on MIDI Channel 2.
The pitches of the notes does not matter, only the rhythm.
16. Hold down a few keys on the keyboard and start the sequencer.
The keys you press should be played with the rhythm from the sequencer.
Function “A” – External triggering of Amplifier Envelope
This function can be used to trigger the Amplifier envelope via notes coming in via MIDI, instead of by
playing the keyboard. Just as with the previous function, this can be used to play back preprogrammed
rhythms in your MIDI sequencer while inputting the actual pitch(es) by playing the keyboard.
You must play keys on the keyboard, or via MIDI (on the Program slot’s “basic” MIDI Channel), to get
any sound!
The parameters are the same as for the Filter Envelope function, see above.
If this function is activated and no MIDI notes are triggering the Amplifier envelope, the instrument will
be silent!
Function “5” – External Velocity Morph
This function is used to control the Velocity/Morph function via the velocity numbers of incoming MIDI
notes.
This differs from the way Velocity/Morph is normally applied. Normally the velocity is applied each time
you press a key. With the External Velocity Control function, however, you can press and hold notes and
vary their timbre via the velocity of the incoming notes without releasing the keys (that is – without re-
triggering the envelopes).
You can use the Program Select buttons to switch between “of” and “on”.
The velocity control happens on its own MIDI Channel and note number(s), completely independent of
the MIDI Channel used for defining which keys should be played. It can be controlled from all notes on
one MIDI Channel or one specific note number on one MIDI Channel (see Function 3 above for how to
specify the MIDI note number and the MIDI Channel).
▼ When this function is activated, and a Note On message comes in, the parameters’ values are adjusted
according to the note’s Velocity value.
▼ When a Note Off message comes in, the Velocity/Morph function is reset to the minimum value.
Please note that you must play the keyboard to hear anything. Also note that the Velocity/Morph must
be set up beforehand for this function to have any effect on the sound.
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
