Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 62 van 114
Page 62 Shift Functions
▼ For the Program and Control parameters, the “on” setting means that the respective MIDI data is trans-
mitted and received by the Nord Lead 2, while the “of” setting means that it is not.
▼ For the Arpeggio parameter, the “on” setting means that generated arpeggios can be sent out as MIDI
notes. This makes it possible to arpeggiate chords on connected synthesizers and sound modules, and
to record arpeggios in a sequencer.
With the “of” setting, the actual chord you play on the keyboard is sent to MIDI Out, regardless of
whether the Nord Lead 2 arpeggio is activated or not.
Be sure to turn the Arpeggio MIDI Out feature off if you are using Nord Lead 2 in Local Off mode and/
or in a “Thru-loop” with a sequencer, other MIDI instruments etc! Under such conditions, the Arpeggio
MIDI Out feature will either prevent the instrument from sounding at all, or cause a MIDI feedback loop.
MIDI Channel
Program Slot MIDI Channel
To set the MIDI Channel that a certain Program slot receives and transmits on, proceed as follows:
1. Hold down “Shift” and press “MIDI Ch”.
2. The display shows the MIDI Channel for the active Program slot.
3. Select the Program slot you want to make settings for.
The Program slot’s LED flashes.
4. Use the Up/Down buttons to set the MIDI Channel.
If you don’t want the slot to respond to or send MIDI, set it to “off”.
For more information on Program slots and MIDI Channels, see page 71.
Global MIDI Channel
This is the MIDI Channel used for transmitting and receiving Program Change messages for switching
between Performances. To set the Global MIDI Channel, proceed as follows:
1. Hold down “Shift” and press “MIDI Ch”.
2. Press “MIDI Ch” again.
The display now shows the Global MIDI Channel.
3. Use the Up/Down button to set the MIDI Channel.
For more information on the Global MIDI Channel, see page 71.
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
