Nord Lead 2 handleiding
Handleiding
Je bekijkt pagina 30 van 114
Page 30 Percussion Kits
Editing the sounds in a Percussion Kit
While the white keys are used to play the percussion sounds, the black keys are used for selecting which
sound to make changes for:
If for example you want to edit the snare sound in kit P0, proceed as follows:
1. Select Percussion Kit P0 as described on the previous page.
2. Press one of the keys F#, G#, A# in the lowest octave.
The display will briefly show “-2”, indicating that percussion sound number 2 is selected for editing.
3. Now you can use the knobs and buttons on the panel to edit the selected percussion sound to your liking,
just as in regular Nord Lead 2 programs.
You can play the other sounds freely while editing the selected sound, as long as you don’t press any
other black key (since this would select another sound for editing).
There is one limitation when programming the percussion sounds: All of the sounds in a Percussion Kit
will share the same LFOs. The Nord Lead 2 will use the LFO rate, waveform and destination settings of
the last played percussion sound.
4. When you’re satisfied with the first sound, press another black key to select another percussion sound for
editing, according to the figure above.
Edited Percussion Kits cannot be saved in the ROM Bank of the Nord Lead 2. To save Percussion Kits,
you can either use an optional PCMCIA S-RAM card or dump MIDI Sys Ex data to a sequencer or MIDI
recorder (see page 73).
Drum Sound 1
Drum Sound 2
Drum Sound 3
Drum Sound 4
Drum Sound 5
Drum Sound 6
Drum Sound 7
Drum Sound 8
TUNE OUT MODE LOCAL PROG. CTRL
STORE
Bekijk gratis de handleiding van Nord Lead 2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nord |
| Model | Lead 2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11965 MB |
