Ninja Intelli-Sense CT682 handleiding

Handleiding

12345678910111213141516171819/ 19

Afdrukken

Je bekijkt pagina 8 van 19

13 14AUS 1800 099 385 or NZ 0800 112 660 ninjakitchen.com.au

ENGLISH

1

Place the unplugged motor

base on a clean, dry, and

level surface such as a

countertop or table. Press

downward on the motor

base to adhere the suction

cups to the work surface.

Ensure the motor base is

connected to power.

2

Lower the Total Crushing

Pitcher onto the motor

base. The handle should

be aligned slightly to the

right and the pitcher should

be oriented so the LOCK

symbols are visible on the

motor base. Then rotate

the pitcher clockwise until it

clicks into place.

TIP: If the Stacked Blade

Assembly is not fully

seated, you will not be

able to install and lock the

lid into position.

TIP: To learn more about

the unit’s programs, refer

to page 10.

NOTE: Pre-set programs

have pauses and changes in

speed throughout the cycle.

NOTE: DO NOT add

ingredients before completing

installation of the Stacked

Blade Assembly.

NOTE: The pitcher can only

be installed in one orientation.

The handle must be

positioned on the front-right

corner of the motor base to

operate the appliance.

USING YOUR TOTAL CRUSHING PITCHER

IMPORTANT: Review all

warnings on pages 3–6

before proceeding.

3 Exercising care, grasp the

Stacked Blade Assembly

by the top of the shaft and

place it onto the drive gear

inside the pitcher. Note

that the blade assembly

will fit loosely onto the

drive gear.

4 Add ingredients, making

sure to not exceed the

Max Fill line marked on the

side of the pitcher.

5 Place the lid on the pitcher, aligning the triangle symbol

located on the lid with the triangle symbol located on the

pitcher’s handle. Press down on the handle until it clicks

into place. The triangle symbols MUST be aligned for the lid

to lock onto place and the unit to operate. When the unit is

connected to power and the container is correctly locked

into the motor base, press the Power symbol to turn unit

on. The available program buttons will illuminate and the

unit will be ready for use.

12345678910111213141516171819/ 19

Bekijk gratis de handleiding van Ninja Intelli-Sense CT682, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Niet gecategoriseerd