Handleiding
Je bekijkt pagina 18 van 28
EXISTING CONSTRUCTION: INSTALLING A BRACKET (CONTINUED)
4. Continue turning the coat hanger as you move it into the cavity to a depth of approxi-
mately 4 inches. If you feel an obstruction, fill the hole(s) with spackling compound
and repeat steps 1 through 4 at a new location.
5. If the coat hanger moves freely in a complete circle, hold the supplied template up
to the wall or ceiling and level it in the horizontal or vertical position. Use a pencil to
outline the cutout on the surface and then drill the four corner holes with a 1/4-inch bit
(see Figure 14 on page 17).
6. If you are cutting drywall, use a sheetrock or keyhole saw. Cut the outline with the saw
at a 45-degree angle. That way, the drywall section can be replaced cleanly if there is
an unseen obstruction behind the wall.
7. If you are cutting into a plaster ceiling, use masking tape to outline the penciled open-
ing and use a razor to score the plaster down to the lath beneath. Then use a chisel to
remove all of the plaster within the taped outline. To actually cut the lath, consider the
following two professional methods:
• Use a saber saw with a metal cutting blade for the quickest cut. However, saw-
ing lath with a saber saw can easily vibrate plaster off the ceiling in a completely
distant location, thereby creating more patchwork.
• If you have the patience, use a pair of tin snips to slowly nip away at the lath
instead. There is little risk with this method – it is just more time consuming.
16
Bekijk gratis de handleiding van Niles HDFX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Niles |
| Model | HDFX |
| Categorie | Speaker |
| Taal | Nederlands |
| Grootte | 2516 MB |
