Newline Vega Pro handleiding
Handleiding
Je bekijkt pagina 20 van 24
19
2.6 Installing the OPS (Optional)
The OPS does not support hot plugging. Therefore, you must insert or remove the OPS when the
display is powered off. Otherwise, the display or OPS may be damaged.
You will need to purchase the OPS separately. Perform the following steps to install the OPS.
Step 1 Unscrew the M4 screws by hand to remove the OPS protective cover.
Step 2 Push the OPS into the OPS port on the rear of the panel until firmly seated, using the M4
screws to secure the OPS.
2.7 Installing the SDM-S (Optional)
The SDM-S does not support hot plugging. Therefore, you must insert or remove the SDM-S when
the display is powered off. Otherwise, the display or SDM-S may be damaged.
Currently we don't provide SDM-S, but if you have a SDM-S to use, please install refering to the
following steps.
Step 1 Unscrew the 2 screws on the SDM-S slot and remove the shielding cover.
Bekijk gratis de handleiding van Newline Vega Pro, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Newline |
| Model | Vega Pro |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4081 MB |
