Handleiding
Je bekijkt pagina 50 van 61
47
5
Serial Port Control
IP Control:
Use a network connection to control the device over an Internet Protocol (IP) network;
IP Control supports the commands listed in the section below.
Note: Power On via IP Control is not supported.
• The following is an example test method. There is no standard usage instruction
for this function:
1. Configuration: Connect the PC and the large screen to the same network, start
the IP Control debugging tool, select TCP Client for the port number, fill in the
corresponding IP address and port number, and click connect.
2. Send commands: After the connection is successful, enter the command in the
command pane to test.
Configuration information for using tools
IP
Machine IP
Port: TCP/UDP 6688
Configuration information for using tools
Data bits
8
Baud rate
19200
RS-232 operation instructions:
RS-232 is a standard protocol for serial communication. RS-232 over serial refers to
the use of this standard to enable communication between devices using a serial port.
• How to use:
1.Configuration: The PC and the large screen are connected via a physical RS-232
(DB9) cable, and the serial port is configured to use the same communication settings,
including baud rate, data bits, parity and stop bits.
2.Send commands: After the connection is successful, send commands to the large
screen terminal through RS-232. The display receives the command, interprets the
command, and performs the requested operation. The screen will respond by returning
a return value to confirm command execution or provide status information.
Port: COM1 (Set according to PC or controlling product’s port number)
Odd/even check
Stop bit
None
1
Before using IP Control and/or RS-232 serial port control, you need to ensure
t
hat the setting is enabled. RS-232
is enabled by default.
Instructions to enable/disable RS-232 & IP Control:
1. Settings > System
> Power
& Energy > Power
2. If you need to use IP Control, turn on the IP Control option switch; if you need to
use the RS232 serial port, turn on the RS232 option;
Bekijk gratis de handleiding van Newline STV-4324-PLUS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Newline |
| Model | STV-4324-PLUS |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 7161 MB |
