Newland MT93 Megattera Standard Handleiding (77 Pagina's)

Handleiding

30

Scan Mode

The MT93 provides the following four scan modes:

1. Level mode: Press and hold the scan trigger to start a decode session which continues until the trigger is released.

2. Continuous mode: Press the scan trigger to continuously read barcodes. To suspend or resume scan operation, simply

press the scan trigger.

Scan interval (ms): This parameter sets the timeout between decode sessions.

3. Pulse mode: Press the scan trigger to start a decode session which continues until the decode session timeout expires.

4. Delay mode (Scan on release key): Press and hold the scan trigger to aim at barcode then release it to start a decode

session which continues until the decode session timeout expires or a barcode is decoded. It is advised to use this scan

mode and the Acuscan Decoding feature to ensure that only the desired barcodes are read if multiple barcodes are placed

closely together.

Decode session timeout (ms): This parameter sets the maximum time decode session continues during a scan attempt.

Masked repeat interval (ms): This parameter sets the time interval between two successive reads on the same barcode.

Bekijk gratis de handleiding van Newland MT93 Megattera Standard, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.