Handleiding
Je bekijkt pagina 18 van 54
EN
www.newair.com 18
TROUBLESHOOTING
If any of the following problems arise, and the solutions below do not solve the
problem, please contact customer service at support@newair.com
Problem
Possible Cause
Solution
The air conditioner
does not work
The unit is not turned
on or plugged in, the
power source is not
functioning, the water
tank is full, the timer
has elapsed, the power
cord safety switch has
been tripped
Ensure the unit is plugged
into a functional outlet
and turned on. Empty the
tank, disable the timer,
and reset the power cord
safety switch if needed.
The air conditioner is
not cooling
The air vents are
blocked, other sources
of heat are affecting
the unit, the filters are
too dirty, the
temperature setting is
too high, the fan speed
is set too low
Ensure that all vents are
not blocked and that the
dust filter is clean. Set the
temperature below the
ambient temperature, and
raise the fan speed to
high.
The air conditioner is
making too much
noise, or shaking while
running
The floor under the
unit is not even, the
unit is not standing
securely
Ensure that the unit is set
on stable flooring.
Caution:
If the following issues occur, immediately turn off the unit, unplug it, and
contact customer service.
• The power cord is overheating or its coating is exposed or damaged.
• The air conditioner is producing an abnormal odor.
• The display is showing “E1” or “E2” (likely an issue with a faulty component)
Bekijk gratis de handleiding van NewAir NAC14KWHH2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NewAir |
| Model | NAC14KWHH2 |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 6904 MB |
