Nevir NVR-WMFL2060INA-SD handleiding
Handleiding
Je bekijkt pagina 18 van 68
program can be used to clean the exterior and the interior of the drum.
Notes: During self-cleaning, do not add clothes or detergents.
Cleaning the universal coupling （once every six months is recommended）
1. Remove the water supply hose from the universal coupling.
2. Screw off the fastener by following the arrow.
3. Rinse the interior of the fastener with water.
4. Install the clean fastener and the water supply hose.
Cleaning the inlet valve (once every six months is recommended)
1. Remove the water supply hose from the washing machine.
2. Take out the filter screen from the inlet valve.
3. Clean the filter screen thoroughly with a toothbrush or similar
tools. Install it to the inlet valve.
4. Connect the water supply hose again.
Cleaning the filter of the drainage pump (once a month is recommended)
1. After drainage, disconnect the power plug, press the clip above the decorative
cover for the drainage pump at th
e right corner in the front of the body, and open
the filter cover. (Note: if there is hot water in the washing machine, please take the
above actions only after cooling.)
2. Screw off the filter anti-clockwise.
3. Rinse the filter thoroughly with water.
4. Insert the filter, screw it clockwise and close the decorative cover for the drainage
pump.
Notes: a. The filter must be tightly screwed to prevent water from leaking.
b. Do not clean the fil
ter when a program is running.
Fastener
Inlet valve
Bekijk gratis de handleiding van Nevir NVR-WMFL2060INA-SD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nevir |
| Model | NVR-WMFL2060INA-SD |
| Categorie | Wasmachine |
| Taal | Nederlands |
| Grootte | 10178 MB |