Nevadent NZR 1.5 B3 handleiding
Handleiding
Je bekijkt pagina 26 van 106
NZR 1.5 B3
GB
│
IE
│
23 ■
Power supply
♦ Use a 1.5V battery 6 to operate the appliance.
To insert the supplied battery 6 proceed as follows:
1) Carefully pull the housing 7 off the hand set 4
and place it to one side.
2) Insert the battery 6. Pay attention to the polarity
markings given in the battery compartment.
3) Push the housing 7 back onto the hand set 4
until it sits firmly in place and the gap is fully
closed. The anti-slip dimples on the housing 7
must be on the same side as the anti-slip dim-
ples on the hand set 4.
The writing on the
housing
7
must be on the same side as the slider
switch
5
.
NOTE
► If the effectiveness of the cleaning starts to decrease, the
battery 6 needs to be replaced.
Handling and use
This section provides important information about proper hand-
ling and operation of the appliance.
Fitting the cleaning attachment
1) Remove the appliance head 1 by turning it slightly so
that the dot on the appliance head 1 is aligned with the
symbol on the hand set 4. Then pull the appliance
head 1 upwards and off.
2) Push the attachment fitting 3 into the hole of one of the
cleaning attachments 2 in the storage box 8. You will
feel a slight click.
3) Pull the hand set 4 away from the storage box 8. The
cleaning attachment 2 comes out of the storage box 8.
4) Check that the cleaning attachment 2 is firmly attached
to the attachment fitting 3. If necessary, push the cleaning
attachment 2 onto the attachment fitting 3 with slightly
more force.
Bekijk gratis de handleiding van Nevadent NZR 1.5 B3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nevadent |
| Model | NZR 1.5 B3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7576 MB |
