Nevadent NZR 1.5 A1 handleiding
Handleiding
Je bekijkt pagina 9 van 44
NZR 1.5 A1
GB
│
IE
│
NI
│
7 ■
♦ Remove all packaging material.
Power supply
♦ Use a 1.5V battery 6 to operate the appliance.
To insert the supplied battery 6 proceed as follows:
1) Carefully pull the housing 7 off the hand set 4
and place it to one side.
2) Insert the battery 6. Pay attention to the polarity
markings given in the battery compartment.
3) Push the housing 7 back onto the hand set 4until it sits
firmly in place and the gap is fully closed. The anti-slip
dimples on the housing 7 must be on the same side as
the anti-slip dimples on the hand set 4. The writing on
the housing 7 must be on the same side as the operat-
ing button 5.
NOTE
► If the effectiveness of the cleaning starts to decrease, the
battery 6 needs to be replaced.
Handling and use
This section provides important information about proper hand-
ling and operation of the appliance.
Fitting the cleaning attachment
1) Remove the appliance head 1 by turning it slightly so
that the dot on the appliance head 1 is aligned with the
symbol on the hand set 4. Then pull the appliance
head 1 upwards and off.
2) Push the attachment fitting 3 into the hole of one of the
cleaning attachments 2 in the storage box 8. You will
feel a slight click.
3) Pull the hand set 4 away from the storage box 8. The
cleaning attachment 2 comes out of the storage box 8.
4) Check that the cleaning attachment 2 is firmly attached
to the attachment fitting 3. If necessary, push the cleaning
attachment 2 onto the attachment fitting 3 with slightly
more force.
IB_290413_NZR1.5A1_DK.indb 7 19.05.17 11:53
Bekijk gratis de handleiding van Nevadent NZR 1.5 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nevadent |
| Model | NZR 1.5 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3211 MB |
