Nevadent NZAE 3.7 A1 handleiding
Handleiding
Je bekijkt pagina 9 van 40
■ 6
│
GB
│
IE
│
NI
│
CY
NZAE 3.7 A1
Operating components
(See fold-out page for illustrations)
1 Brush head
2 Drive shaft
3
On/Off button + programme selection button
4
Charging indicator lamp
5 Charger
Handling and operation
This section provides you with important information on handling and using the appliance.
Charging the battery
♦ Connect the charger 5 to a mains power socket.
♦ Place the switched-off handset on the charger 5. The charging indicator lamp 4
lights up red during charging. It takes approximately 10 hours for the empty battery
to be fully charged. Once the handset is fully charged, the charging indicator lamp 4
lights up green.
♦ If the charging indicator lamp 4 starts flashing red, the battery is empty and needs
to be recharged.
NOTE
► Place the handset back on the charger 5 after use. This ensures that your tooth-
brush always operates at its optimum performance. The battery is not damaged
by regular charging.
Using the brush heads
2 brush heads 1 are supplied with the appliance.
Before first use, clean the brush
heads 1
in fresh running water.
♦ Take a brush head 1 and insert it from above onto the drive shaft 2 of the handset.
Ensure that the drive shaft 2 slides precisely into the socket on the brush head 1.
Push the brush head 1 down until it completely covers the drive shaft 2.
♦ To remove the brush head 1, pull it upwards and off the drive shaft 2.
IB_368330_NZAE3.7A1_GB-IE-NI-CY.indb 6
IB_368330_NZAE3.7A1_GB-IE-NI-CY.indb 6
25.06.2021 13:03:52
25.06.2021 13:03:52
Bekijk gratis de handleiding van Nevadent NZAE 3.7 A1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nevadent |
| Model | NZAE 3.7 A1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3970 MB |
