Netgear Orbi RBE870 handleiding
Handleiding
Je bekijkt pagina 87 van 150
7. To limit access to the LAN only, select the Private check box.
If Private is selected, the static route is not reported in RIP.
8. Select the Active check box to make this route take effect.
9. Type the IP address of the final destination.
10. Type the IP subnet mask for this destination.
If the destination is a single host, type 255.255.255.255.
11. Type the gateway IP address.
This address must be on the same LAN segment as the router.
12. Type a number from 2 through 15 as the metric value.
This value represents the number of routers between your network and the
destination.
Usually, a setting of 2 or 3 works.
13. Click the Apply button.
The static route is added.
Edit a static route
To edit a static route:
1. Launch a
web browser from a computer or mobile device that is connected to your
Orbi network.
2. Enter orbilogin.com (Windows and Android devices) or orbilogin.local (Apple
MacOS
and iOS devices).
A login window displays.
3. Enter the Orbi admin user name and password.
The user name is admin. The password is the one that you specified when you set
up
your Orbi. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > Advanced > Static Routes.
The Static Routes page displays.
5. In the table, select the radio button for the route.
6. Click the Edit button.
The Static Routes page adjusts.
7. Edit the route information.
8. Click the Apply button.
Your settings are saved.
User Manual 85 Specify Network Settings
Whole Home Tri-Band Mesh WiFi 7 System
Bekijk gratis de handleiding van Netgear Orbi RBE870, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Netgear |
| Model | Orbi RBE870 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7328 MB |
