Netgear Orbi RBE870 handleiding
Handleiding
Je bekijkt pagina 147 van 150
Troubleshoot your network using
the ping utility
Most network devices and routers contain a ping utility that sends an echo request
packet to the designated device. The device then responds with an echo reply. You can
easily troubleshoot a network using the ping utility in your computer or workstation.
Test the LAN path to your router
You can ping the router from your computer to verify that the LAN path to your router
is set up correctly.
To ping the router from a Windows computer:
1. From the Windows toolbar, click the Start button and select Run.
2. In the field provided, type ping followed by the IP address of the router, as in this
example:
ping www.orbilogin.com
3. Click the OK button.
You should see a message like this one:
Pinging <IP address > with 32 bytes of data
If the path is working, you see this message:
Reply from < IP address >: bytes=32 time=NN ms TTL=xxx
If the path is not working, you see this message:
Request timed out
If the
path is not functioning correctly, you might be experiencing one of the following
problems:
•
Wrong physical connections
Check that
the appropriate LEDs are on for your network devices. If your router and
computer are connected to a separate Ethernet switch, make sure that the link LEDs
on the switch are lit for the switch ports that your computer and router are connected
to.
•
Wrong network configuration
Verify that the Ethernet card driver software and TCP/IP software are both
installed
and configured on your computer.
User Manual 145 Troubleshooting
Whole Home Tri-Band Mesh WiFi 7 System
Bekijk gratis de handleiding van Netgear Orbi RBE870, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Netgear |
| Model | Orbi RBE870 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7328 MB |
