Netgear GS108Ev4 handleiding
Handleiding
Je bekijkt pagina 4 van 88
Create an advanced port-based VLAN...................................... 35
Change an advanced port-based VLAN................................... 37
Delete an advanced port-based VLAN...................................... 38
Manage basic 802.1Q VLANs.......................................................... 38
Activate the Basic 802.1Q VLAN mode..................................... 39
Create a basic 802.1Q VLAN and assign ports as members... 40
Assign the port mode in a basic 802.1Q VLAN configuration. 41
Change a basic 802.1Q VLAN.................................................... 43
Delete a basic 802.1Q VLAN...................................................... 44
Manage advanced 802.1Q VLANs................................................. 44
Activate the advanced 802.1Q VLAN mode............................. 45
Create an advanced 802.1Q VLAN............................................ 46
Change an advanced 802.1Q VLAN.......................................... 48
Specify a port PVID for an advanced 802.1Q VLAN................ 49
Set an existing advanced 802.1Q VLAN as the voice VLAN and
adjust the CoS value.................................................................... 50
Edit the OUI table for the voice VLAN....................................... 51
Delete an advanced 802.1Q VLAN............................................ 53
Deactivate a port-based or 802.1Q VLAN mode and delete
configured VLANs............................................................................. 53
Chapter 5 Manage the Switch in Your Network
Set up static link aggregation.......................................................... 56
Set up a link aggregation group................................................ 56
Make a link aggregation connection......................................... 57
Enable a link aggregation group............................................... 58
Manage multicast.............................................................................. 58
Manage IGMP snooping.............................................................. 59
Enable a VLAN for IGMP snooping............................................ 59
Manage blocking of unknown multicast addresses................. 60
Manage IGMPv3 IP header validation....................................... 61
Set up a static router port for IGMP snooping.......................... 62
Change the IP address of the switch.............................................. 62
Reenable the DHCP client of the switch......................................... 63
Chapter 6 Maintain and Monitor the Switch
Update the firmware on the switch................................................. 66
Manage the configuration file......................................................... 67
Back up the switch configuration............................................... 67
Restore the switch configuration................................................ 68
Return the switch to its factory default settings............................. 69
Use the RESET button to reset the switch................................. 69
Use the device UI to reset the switch......................................... 69
Control access to the device UI....................................................... 70
4
Gigabit Ethernet Plus Switch Model GS108Ev4
Bekijk gratis de handleiding van Netgear GS108Ev4, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Netgear |
| Model | GS108Ev4 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7019 MB |
