Netgear GS105EPP handleiding
Handleiding
Je bekijkt pagina 30 van 99
Set rate limits for a port
You can limit the rate of incoming (ingress) traffic, outgoing (egress) traffic, or both on
a port to prevent the port (and the device that is attached to it) from taking up too much
bandwidth on the switch. Rate limiting simply means that the switch slows down all
traffic on a port so that traffic does not exceed the limit that you set for that port. If you
set the rate limit on a port too low, you might, for example, see degraded video stream
quality, sluggish response times during online activity, and other problems.
You can select each rate limit as a predefined data transfer threshold from 512 Kbps
(Kbit/s) to 512 Mbps (Mbit/s).
You also can set port rate limits (the same feature) as part of the QoS configuration on
the switch.
•
For setting port rate limits in port-based QoS mode, see Use port based quality of
service mode and set rate limits for ports on page 25.
•
For setting port rate limits in 802.1/DSCP QoS mode, see Use 802.1P/DSCP quality
of service mode and set the rate limits for ports on page 27.
NOTE: If you set a port rate limit, the actual rate might fluctuate, depending on
the type of traffic that the port is processing.
To set rate limits for incoming and outgoing traffic on a port:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
3. Enter the device management password.
The password is the one that you specified the first time that you logged in. The
password is case-sensitive.
The HOME page displays.
The PORT STATUS pane displays on the right or the bottom of the HOME page,
depending on the size of your browser window.
A port that is in use shows as UP. A port that is not in use shows as AVAILABLE.
4. Select the port.
The pane displays detailed information about the port.
5. Click the EDIT button.
The EDIT PORT page displays for the selected port.
6. From the In Rate Limit menu, Out Rate Limit menu, or both, select the rate in Kbps
(Kbit/s) to Mbps (Mbit/s).
User Manual30Optimize the Switch
Performance
Gigabit Ethernet Easy Smart Managed Switches
Bekijk gratis de handleiding van Netgear GS105EPP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Netgear |
| Model | GS105EPP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3048 MB |
