Netgear GS105EPP handleiding
Handleiding
Je bekijkt pagina 28 van 99
The QOS page displays.
5. If the selection from the QoS Mode menu is Port-Based, do the following to change
the selection to 802.1P/DSCP:
a. From the QoS Mode menu, select 802.1P/DSCP.
A pop-up warning window opens.
b. Click the CONTINUE button.
The pop-up window closes.
NOTE: For information about broadcast filtering, see Manage broadcast
filtering and set port storm control rate limits on page 28.
6. To set rate limits, do the following:
a. In the RATE LIMITS tab, click the Edit button.
The EDIT RATE LIMITS page displays.
b. For each port for which you want to set rate limits, select the rate in Kbps (Kbit/s)
to Mbps (Mbit/s) from the individual In Limits and Out Limits menus for the port.
The default selection is No Limit.
c. Click the APPLY button.
Your settings are saved and the EDIT RATE LIMITS page closes.
Manage broadcast filtering and set port
storm control rate limits
A broadcast storm is a massive transmission of broadcast packets that are forwarded
to every port on the switch. If they are not blocked, broadcast storm packets can delay
or halt the transmission of other data and cause problems. However, you can block
broadcast storms on the switch.
You can also set storm control rate limits for each port. Storm control measures the
incoming broadcast, multicast, and unknown unicast frame rates separately on each
port, and discards the frames if the rate that you set for the port is exceeded. By default,
no storm control rate limit is set for a port. You can select each storm control rate limit
as a predefined data transfer threshold from 512 Kbps (Kbit/s) to 512 Mbps (Mbit/s).
To manage broadcast filtering and set the storm control rate limits for ports:
1. Open a web browser from a computer that is connected to the same network as the
switch, or connected directly to the switch through an Ethernet cable.
2. Enter the IP address that is assigned to the switch.
A login window opens.
User Manual28Optimize the Switch
Performance
Gigabit Ethernet Easy Smart Managed Switches
Bekijk gratis de handleiding van Netgear GS105EPP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Netgear |
| Model | GS105EPP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3048 MB |
