Handleiding
Je bekijkt pagina 10 van 91
Rated voltage
220-240V~50Hz
PACKING LIST
• Heater
• Remote control
• Instruction manual
• Accessories pack 1 set:
− 2x support
− 8x metal screw for supports
ASSEMBLY INSTRUCTION
Model L mm H mm L1 mm H1 mm
90-091 515 450 218 344
90-092 675 450 378 344
90-093 835 450 538 344
Unpack your package and find the heater together with the wall mounting accessories pack.
1. Mark the positions of the four holes to be drilled on the wall, and Drill the holes with the drill bit. Make sure the distance between each holes
is same as the round holes on the brackets at back of the heater.
2. Insert the plastic rails fitting into the holes.
3. Insert the metal screws into the plastic rails.
4. Lift the heater and aim the round holes on the brackets at back of the heater to the screws on the wall and slide the heater 10mm to the
right
5. Make sure the distance between the bottom of the heater and the floor is no less than 10cm when the heater is installed
Bekijk gratis de handleiding van NEO Tools 90-090, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NEO Tools |
| Model | 90-090 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 19731 MB |
