NEO Tools 90-061 handleiding

Heater

NEO Tools

48 pagina's

PDF beschikbaar

Handleiding

TRANSLATION OF THE ORIGINAL INSTRUCTION

FAN HEATERS

90-060 / 90-061

NOTE: BEFORE THE EQUIPMENT IS USED FOR THE FIRST TIME, READ THIS INSTRUCTION MANUAL AND KEEP IT FOR FUTURE

REFERENCE. PEOPLE WHO HAVE NOT READ THIS INSTRUCTION SHOULD NOT ASSEMBLE, LIGHT, ADJUST OR OPERATE THE UNIT

DETAILED SAFETY REGULATIONS

ATTENTION!

Read carefully-The infrared heater is designed for safe operation. Nevertheless, installation, maintenance and operation of the heater can

be dangerous. Observing the following procedures will reduce the risk of fire, electric shock, injury to person and keep installation time to

a minimums.

1.1 This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack

of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

1.2 WARNING: In order to avoid overheating, do not cover the heater.

1.3 Children of less than 3 years should be kept away unless continuously supervised.

1.4 Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended

normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the

hazards involved.Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

1.5 CAUTION-some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable

people are present.

2. Introduction

2.1 Depending on the power cord type this fan heater may be used only in household, warehouses and workshops, building sites or greenhouses

depending. It incorporates a thermostat and a self-resetting thermal cut-out to control the heating elements. The thermostat feels the air temperature

and controls the surrounding temperature. The fan motor is controlled by thermostat and it stops working when the thermostat cuts off the heating

element. The self-resetting thermal cut-out will switch off the heater to ensure the safety when overheating.

2.2 When using the heater for the first time, you may notice a slight emission of smoke. This is quite normal and it stops after a short time.

3. Technical specifications

Model

90-060

90-061

Waterproof of Class

Voltage

220-240V~

required power

2000W

3000W

current

8.3-9.1A

12.5-13.6A

Setting

20/1000/2000W

7/2000/3000W

Manual reset Thermostat

65°C

Product meast (mm)

210×130×260

234×130×284

N.W.(KG)

1.45

1.47

3.1 Housing of steel plate and coated by heat-resistant powder .

3.2 Supplied complete with cord and plug .

4. Description of Control Panel

90-060

90-061

4.1 Left Knob : selector with heat setting

the device is turned off

fan on

the heating element works at half power

the heating element is working at full power)

4.2 Right Knob : Thermostat dial

5. Special safety regulations

5.1 Before use, please check the marking on the power cord. Depending on the power cord type this appliance may be used in different ambient

conditions:

Type

You can use the appliance in

Do not use in

H05VV-F

household, warehouses and workshops, building sites or greenhouses

building sites or greenhouses

H07RN-F

household, warehouses and workshops, building sites or greenhouses

H05RN-F

household, warehouses and workshops or greenhouses

building sites

H05RR-F

household, warehouses and workshops

building sites or greenhouses

5.2 When using electrical appliance basic precautions should always be followed including below:

5.2.1 The fan heater is not suitable for use outdoors in damp weather, in bathrooms or in other wet or damp environments.

Bekijk gratis de handleiding van NEO Tools 90-061, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.