Handleiding
Je bekijkt pagina 10 van 40
en Basic operation
6.1 Initial use
You need to make settings for initial use before you can
use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains or
following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement: The function selector must be set to the
"Off" position .
1.
Use the or button to set the time.
2.
Press the button.
The time that is set appears in the display.
Tip: You can go to the basic settings
Page13
to
specify whether or not the time should be shown on the
display.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories before
using the appliance to prepare food for the first time.
1.
Remove any accessories and leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2.
Before heating, wipe the smooth surfaces in the cook-
ing compartment with a soft, damp cloth.
3.
Ventilate the room while the appliance is heating.
4.
Set the type of heating and temperature.
"Basic operation", Page10
Type of heat-
ing
Circo Therm hot air
Temperature Maximum
Cooking time 1 hour
5.
Switch off the appliance after the specified cooking
time.
6.
Wait until the cooking compartment has cooled down.
7.
Clean the smooth surfaces with soapy water and a
dish cloth.
8.
Clean the accessories with soapy water and a dish
cloth or soft brush.
Basic operation7 Basic operation
7.1 Switching on the appliance
Turn the function selector to any position other than
the "Off" position .
The appliance is switched on.
7.2 Setting the type of heating and
temperature
1.
Use the function selector to set the type of heating.
2.
Use the temperature selector to set the temperature
or grill setting.
The appliance starts heating after a few seconds.
Depending on the appliance type, rapid heating
automatically switches off for set temperatures of
200°C and above for certain types of heating.
"Rapid heating", Page10
3.
When your food is ready, switch off the appliance.
Tips
The most suitable type of heating for your food can
be found in the description of the type of heating.
"Types of heating", Page6
You can also set a cooking time and end time on the
appliance.
"Time-setting options", Page11
Changing the type of heating
You can change the type of heating at any time.
Use the function selector to set the required type of
heating.
Changing the temperature
You can change the temperature at any time.
Use the temperature selector to set the required tem-
perature.
7.3 Switching off the appliance
Turn the function selector to the "Off" position .
The appliance is switched off.
Rapid heating8 Rapid heating
To save time, you can use rapid heating to shorten the
preheat time.
8.1 Setting rapid heating
To ensure an even cooking result, do not place the food
in the cooking compartment until rapid heating has
come to an end.
Note: Do not set a cooking time until rapid heating has
come to an end.
1.
Set a suitable type of heating and a temperature of at
least 100°C.
Rapid heating is possible for the following types of
heating:
– Circo Therm hot air
– Bread baking setting
– Top/bottom heating
Rapid heating automatically switches on at temperat-
ures of 200°C and above.
10
Bekijk gratis de handleiding van Neff B6ACH7AN7B, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neff |
| Model | B6ACH7AN7B |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 10807 MB |
