Handleiding
Je bekijkt pagina 31 van 44
Troubleshooting en
If the power cord of this appliance is damaged, it must be replaced by trained specialist staff.
22.1 Malfunctions
Fault Cause and troubleshooting
The appliance is not working. The circuit breaker in the fuse box has tripped.
Check the circuit breaker in the fuse box.
There has been a power cut.
Check whether the lighting in your room or other appliances are working.
The appliance does not heat up;
lights up in the display.
Demo mode is activated.
1.
Briefly disconnect the appliance from the power supply by switching the circuit
breaker in the fuse box off and then on again.
2.
Deactivate demo mode within 5minutes by changing the last basic setting (de-
pending on the appliance type or ) to .
"Basic settings", Page18
Steam-assisted operation does
not start.
The water tank is empty.
Fill the water tank.
"Filling the water tank", Page14
Descaling locks operations with steam-assisted cooking.
Run the descaling programme in full.
The steam system is defective.
Call .
"Customer Service", Page33
The appliance door cannot be
opened; lights up in the dis-
play.
The childproof lock locks the appliance door.
Deactivate the child safety lock.
"Activating and deactivating the childproof lock", Page18
The time flashes in the display. There has been a power cut.
Reset the time.
lights up in the display and no
settings can be made on the ap-
pliance.
Childproof lock is activated.
Deactivate the child safety lock.
"Activating and deactivating the childproof lock", Page18
flashes in the display and the
appliance does not start.
The cooking compartment is too hot for the selected operation.
1.
Switch off the appliance and allow it to cool down.
2.
Restart the operation.
appears in the display. The maximum cooking time has been reached. To prevent an unwanted perman-
ent operation, the appliance automatically stops heating after several hours if the
settings are unchanged.
Switch off the appliance.
You can configure new settings if required.
Tip: To prevent the appliance from switching off when you do not want it to,
e.g. for an extremely long preparation time, set a cooking time.
"Time-setting options", Page12
- appears in the display. There is too much water in the steam system. The water cannot be pumped back
into the water tank.
1.
Empty the water tank and insert the empty water tank.
"Emptying the water tank", Page15
2.
Reset the time.
3.
Switch the appliance off and then on again.
4.
Run "Descaling interrupted" in full.
A message with appears in the
display, e.g. - .
Electronics fault
1.
Press the button.
If required, reset the time.
If the fault was a one-off, the error message disappears.
2.
If the error message appears again, call the after-sales service. Quote the ex-
act error message and the E no. of your appliance.
"Customer Service", Page33
lights up permanently in the
display.
The water tank is empty.
Fill the water tank.
"Filling the water tank", Page14
31
Bekijk gratis de handleiding van Neff B5AVM7AG7A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neff |
| Model | B5AVM7AG7A |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 11621 MB |
