Handleiding
Je bekijkt pagina 11 van 44
Before using for the first time en
Before using for the first time6 Before using for the first time
Configure the settings for initial start-up. Clean the appli-
ance and accessories.
6.1 Initial use
You need to make settings for initial use before you can
use your appliance.
Setting the time on the clock
Once the appliance has been connected to the mains or
following a power failure, the time flashes on the dis-
play. The time starts at "12:00". Set the current time.
Requirement:: The function selector must be set to the
"Off" position .
1.
Use the or button to set the time.
2.
Press the button.
The time that is set appears in the display.
Tip: You can go to the basic settings
Page18
to
specify whether or not the time should be shown on the
display.
Setting the water hardness
ATTENTION
If the wrong water hardness has been set, the steam
function is impaired and appliance cannot remind you to
descale it at the right time.
Set the water hardness correctly.
Using unsuitable liquids may damage the appliance.
Do not use distilled water or other liquids.
Only use cold, fresh tap water, softened water or non-
carbonated mineral water.
Requirement:: Before you set the water hardness, ask
your water supplier about the hardness of your tap wa-
ter.
1.
Change the water hardness basic setting.
You can find out how to change basic settings in
the section Basic settings
Page18
.
Note: If your tap water is very hard, we recommend
that you use softened water.
Water hardness ba-
sic setting
Water
hard-
ness in
mmol/l
German
hard-
ness
°dH
French
hardness
°fH
0 = softened
1
- - -
1 = soft Up to 1.5 Up to 8.4 Up to 15
2 = medium 1.5-2.5 8.4-14 15-25
3 = hard 2.5-3.8 14-21.3 25-38
4 = very hard
2
Over 3.8 Above
21.3
Over 38
2.
Confirm the change to the basic setting.
6.2 Cleaning the appliance before using it
for the first time
Clean the cooking compartment and accessories before
using the appliance to prepare food for the first time.
1.
Remove any accessories and leftover packaging,
such as polystyrene pellets, from the cooking com-
partment.
2.
Before heating, wipe the smooth surfaces in the cook-
ing compartment with a soft, damp cloth.
3.
Fill the water tank.
"Filling the water tank", Page14
4.
Ventilate the room while the appliance is heating.
5.
Set the type of heating with steam assistance and the
temperature.
"Basic operation", Page12
Type of heat-
ing
Circo Therm hot air with steam as-
sistance
Temperature 200 ºC
Cooking time 30 minutes
6.
Switch off the appliance after the specified cooking
time.
7.
Wait until the cooking compartment has cooled down.
8.
Empty the water tank and dry the cooking compart-
ment.
9.
Set the type of heating with steam assistance and the
temperature.
Type of heat-
ing
Top/bottom heating
Temperature 240°C
Cooking time 30 minutes
10.
Switch off the appliance after the specified cooking
time.
11.
Wait until the cooking compartment has cooled down.
12.
Clean the smooth surfaces with soapy water and a
dish cloth.
13.
Clean the accessories with soapy water and a dish
cloth or soft brush.
1
Only set this if you will be using solely softened water.
2
Also set for mineral water. Only use non-carbonated mineral water.
11
Bekijk gratis de handleiding van Neff B5AVM7AG7A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neff |
| Model | B5AVM7AG7A |
| Categorie | Oven |
| Taal | Nederlands |
| Grootte | 11621 MB |
