Neewer QZ-N handleiding
Handleiding
Je bekijkt pagina 4 van 13
About the Battery
Directions for Use
Directions for Use
Battery icon
Status
3 bars
Full
Medium
Low
Very low. Charge as soon as possible
Battery is running out (the battery should
be charged immediately to prevent misfires
or shutdown)
2 bars
1 bar
Empty
Flashing
(Refer to the battery icon on the display.)
1. Battery levels
Wirelessly sync with an on-camera flash
Example: NEEWER Z2 flash：
2. Battery warnings
04
EN
① Do not charge for over 24 hours.
2. Setting the QZ trigger: On the display, swipe down to access settings UI and
tap <MENU> to open the menu. Tap Wireless Settings to set channels and IDs.
Swipe right to return to main UI and set flash modes or flash power levels of
the desired group.
1. Turn off the camera and mount the trigger onto the camera's hot shoe,
then turn on the trigger and the camera.
② Fully recharge the battery if unused for more than 3 months.
3. Setting the Z2 flash:
Power on the Z2 flash. Press the < > Wireless Settings button and rotate
the adjustment dial to select RX mode. Ensure the display shows the wireless
icon < > and the slave unit icon <RX>. Long-press Function Button 1 (Zm/Fn)
to enter the custom menu, then set the channel <CH> and ID number <ID> to
match the settings on the QZ trigger. (Note: For other flash models, refer to their
respective user manuals.)
4. Press the camera shutter button to trigger a flash.
TX
RX
WL OFF
28
1
M
CH:31
ID:99
RX
V1.0.16
AF
STBY
RX STBY
SCAN
CH
ON
OFF
OFF
60min
32
MENU
Scan idle channels
Wireless sync
Bekijk gratis de handleiding van Neewer QZ-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neewer |
| Model | QZ-N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1321 MB |
