Neewer QZ-N handleiding
Handleiding
Je bekijkt pagina 13 van 13
Upgraded firmware on this product via the USB-C port:
1. While the device is powered off, long press the <M> button, then connect it to
a computer via USB-C cable to enter firmware upgrade mode.
2. Once the upgrade is complete, unplug the USB-C cable to exit upgrade mode.
3. After the upgrade, manually power off the device.
Firmware upgrade
13
EN
Specifications
1. Do not subject the trigger to strong impacts or vibrations.
2. The trigger is not waterproof. Immersion in water or exposure to moisture
may cause malfunctions. Internal rust damage is irreparable.
3. Significant temperature changes, such as moving from cold outdoor to warm
indoor environments, can cause internal condensation. To prevent this, cover
the trigger with plastic wrap to minimize temperature fluctuations.
4. Strong static electricity or magnetic fields from wireless radio transmitters
may interfere with the trigger's operation.
5. If flashes fail to fire or the camera doesn't shoot, please check the following:
low battery; power is on; trigger and flash are on the same channel; sync cable
or hot shoe is securely connected; flash mode is correctly set.
6. If the camera fails to autofocus, verify that manual focus is not engaged on
the camera body or lens. If it is, switch to autofocus.
7. If the trigger's operation is disrupted, try changing its channel.
Safety Precautions
Model QZ-N
Input DC 5V/2A
Compatibility Nikon i-TTL speedlites
Battery capacity 3.7V 1000mAh 3.7Wh
Charge time
Battery life
2.5h
Around 7 days
Yes
±3EV (exposure values) in 1/3 EV increments
Convert TTL mode into manual mode
Via the USB-C port
Yes
Dimmable touchscreen
0-100m
32
OFF, 01-99
A, B, C, D, E
64×41×38mm
60g
AUTO, focal length: 20-200mm
Controlled by the trigger
TTL flash
Manual flash
Stroboscopic flash
Front-curtain sync
Rear-curtain sync
High-speed sync
Exposure compensation
Buzz
ZOOM settings
TCM conversion
Firmware upgrade
Memory function
Display
Transmission range
Number of channels
Wireless IDs
Groups
Dimensions
Weight
※ If upgrading fails, keep the USB cable connected. Press and hold the power,
flash, and M buttons together, then release the power and flash buttons to
re-enter upgrade mode.
Bekijk gratis de handleiding van Neewer QZ-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Neewer |
| Model | QZ-N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1321 MB |
