Handleiding
Je bekijkt pagina 4 van 32
4
a
Quick start guide
Air Cooler
COOL201WT
For more information see the extended manual online:
ned.is/cool201wt
Intended use
The Nedis COOL201WT is a mobile air cooler that uses the built-in
water tank to blow cool air into the room. The air cooler has wheels
for easy positioning, and can be controlled with the remote.
The air cooler comes with two cooling elements that can be used if
water alone does not provide sucient cooling.
This product is intended to be used only with the supplied cooling
elements.
This product is intended for indoor use only.
Any modication of the product may have consequences for safety,
warranty and proper functioning.
This product is intended to be used in household and similar
applications such as kitchen areas.
This product can be used by children aged from 8 years and above
and persons with reduced physical, sensory, or mental capabilities
or lack of experience and knowledge if they have been given
supervision or instruction concerning use of the product in a safe
way and understand the hazards involved. Children shall not play
with the product. Cleaning and user maintenance shall not be done
by children without supervision.
This product is intended for normal household use only. This product
is not intended for: shops, light industry or on farms.
This product is not intended for professional use.
Main parts (image A)
1 Touch control panel
2 Air outlet
3 Water level indicator
4 Cooling elements
5 Carrying handle
6 Air inlet with removable
lter
7 Water tank lock
8 Water tank
9 Power cable
Touch control panel (image B)
1 Timer indicator
2 Swing indicator
3 Mode indicator
4 Cool indicator
5 Fan speed indicator
6 On/o indicator
7 Timer button
8 Swing button
9 Mode button
q Cool button
w Fan speed button
e On/o button
Remote control (image C)
1 Remote control
2 On/o button
3 Fan speed button
4 Mode button
5 Timer button
6 Swing button
7 Cool button
Safety instructions
-
WARNING
• Only use the product as described in this document.
• Do not open the product, there are no user serviceable parts
inside.
• Do not place items on top of the product.
• Never cover the air inlets and outlets.
• Avoid eye or skin contact with the super absorbent polymer in
the cooling elements. In case of contact, immediately ush the
eyes or skin with water.
• Do not immerse the product in water or other liquids.
• Do not expose the product to water, rain, moisture, or high
humidity.
• Do not let children play with the packaging material. Always
keep the packaging material out of the reach of children.
• Always keep the power cable and the product away from usual
walkways.
• Do not drop the product and avoid bumping.
• Disconnect the product from the power source before cleaning.
• Do not use aggressive chemical cleaning agents when cleaning
the product.
• Do not use the product if a part is damaged or defective. Replace
a damaged or defective product immediately.
• Disconnect the product from the power source before service
and when replacing parts.
• This product may only be serviced by a qualied technician for
maintenance to reduce the risk of electric shock.
• The power cable is a CEE 7/17 type plug, without an earth
(ground) connection. Ensure the product is used with
compatible outlets.
• Ensure you have fully read and understood the instructions in
this document before you install or use the product. Keep the
packaging and this document for future reference.
Assembling the product
1. Insert the wheels into the axle holes until they click into place.
4
Make sure the product is placed on a at and stable surface.
4
Keep a minimum of 30 cm of free space on each side of the
product.
2. Remove the protective lm from the CR2025 battery in the
remote control C
1
before use.
3. Plug the power cable A
9
into a power outlet.
Filling the water tank
1. Unlock the water tank lock A
7
.
2. Carefully pull out the water tank A
8
(it cannot be removed
completely).
3. Fill the water tank A
8
with clean water.
4
Do not ll the water tank A
8
above the "max" on the water
level indicator A
3
.
4
Do not use the product if the water level is below the “min”
indicator.
Using the cooling elements
-
Avoid eye or skin contact with the super absorbent polymer in
the cooling elements. In case of contact, immediately ush the
eyes or skin with water.
1. Fill the cooling elements A
4
with clean water up to the
indicator line (MAX).
2. Screw the cap onto the cooling elements A
4
.
4
The cooling elements A
4
do not need to be relled after each
use.
3. Place the cooling elements A
4
in the freezer until they are
frozen.
4. Unlock the water tank lock A
7
.
5. Carefully pull out the water tank A
8
(it cannot be removed
completely).
6. Place the cooling elements A
4
in the water tank A
8
.
7. Make sure the water level is between "min" and "max".
Using the fan
1. Press B
e
or C
2
to switch on the power. The fan starts
automatically.
2. Press B
w
or C
3
to set the fan speed.
B
5
indicates the current fan speed.
3. Press B
e
or C
2
to switch o the power.
Using the cooling function
• Press B
q
or C
7
to activate or deactivate the cooling function.
Bekijk gratis de handleiding van Nedis COOL201WT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nedis |
| Model | COOL201WT |
| Categorie | Airco |
| Taal | Nederlands |
| Grootte | 5465 MB |