Nec LED-Q048e2 handleiding
Handleiding
Je bekijkt pagina 35 van 48
English - 33
Maintenance
CAUTION
Disconnect the power supply to the LED modules when performing the maintenance.
Removing a pixel card (in case of front installation)
Remove the pixel card using the maintenance tool (for Q2 series).
Pull the trigger of the handle to activate the suction function. Release the trigger to stop the suction
function.
Status display
- Lit blue: In operation
- Flashing blue: Battery is low Charge the tool
using the AC adapter supplied
with the maintenance tool.
CAUTION:
Check that the battery of the tool is fully charged before starting the work. Pixel card falls if the battery runs
out. Hold the pixel card with your hand to support in case it falls.
(1) Push the tool against the pixel
card without turning it on.
(2) Turn the tool on, and then pull it straight toward
you to remove the pixel card.
Keep the tool turned on.
(3) Hold the pixel card, and then turn the tool off.
CAUTION:
Do not turn the tool off until
you hold the pixel card.
Otherwise, the pixel card may
fall and break.
*To install the pixel card, use the tool and follow the removal procedure in the reverse order.
Bekijk gratis de handleiding van Nec LED-Q048e2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nec |
| Model | LED-Q048e2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7877 MB |
