Handleiding
Je bekijkt pagina 7 van 103
English - 5
Parts Name
① ③
⑤
⑪
Front Rear
⑦
⑩
⑧
⑨
⑫
④②
⑥
Name Description
Interface connectors Input and output connectors for the signal and AC power.
12 Signal input/output
To input the signal from the LED controller or the previous LED module.
When a signal is input into 1, the signal is output from 2.
When a signal is input into 2, the signal is output from 1.
34 Signal input/output
Not functioning with this product.
56 Power input (output) When AC power is input into 5, AC power is output from 6.
When AC power is input into 6, AC power is output from 5.
Do not input AC power into both 5 and 6.
7 Status lamp (red)
Lights up when power is on.
8 Status lamp (blue)
Not functioning with this device.
9 Status lamp (green)
Flashes at intervals of approximately 4 seconds when no signal is input.
Flashes at intervals of about 1 second when a signal is being input.
0 Test button
Used to display the test patterns. The displayed pattern changes each
time the test button is pressed.
The signal from the LED controller must be interrupted to display a test
pattern.
! Handle
Use the handles when carrying and installing the cabinet.
@ Guide pin
Used to align the cabinets when installing them on top of each other.
Bekijk gratis de handleiding van Nec LED-FC009i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nec |
| Model | LED-FC009i |
| Categorie | Monitor |
| Taal | Nederlands |
| Grootte | 19238 MB |
