Navman MiVue 180 WIFI handleiding
Handleiding
Je bekijkt pagina 8 van 45
7
1. Before attaching the device mount to the windscreen, it is recommended to clean the
windscreen with rubbing alcohol and make sure that the installation area is free of dust,
oil and grease. If installing the device using an electrostatic sticker (optional), attach
the electrostatic sticker to the windscreen (make sure there are no air bubbles trapped
underneath).
Note:
If your vehicle’s windscreen has a third visor frit (a patch
of black dots around the rear view mirror), please do not
attempt to ax the electrostatic sticker/dash cam in this area
as it is likely to fall o.
Attaching the device to an electrostatic sticker allows for the
easy removal of the device mount from the windscreen.
2. Connect the vehicle power adapter to the cigarette lighter. Route the cables through the
top ceiling and the A-pillar so that it does not interfere with driving. Make sure that the
cable installation does not interfere with the vehicles airbags or other safety features.
3. When adjusting the viewing angle, make sure that the camera’s view is parallel with level
ground and the ground to sky ratio is close to a 50/50 split.
Bekijk gratis de handleiding van Navman MiVue 180 WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Navman |
| Model | MiVue 180 WIFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2803 MB |
