Navman MiVue 180 WIFI handleiding
Handleiding
Je bekijkt pagina 14 van 45
13
The dash cam will automatically enter Parking Mode and turn o the LCD screen when it
detects the vehicle ignition has turned o. When movements or vibrations are detected
during Parking Mode monitoring, the system will save a video which contains:
Smart Mode 5 secs before + 15 secs after a detected event
Low Power Mode 0 secs before + 20 secs after a detected event
Note: Recording times listed above are based on the moment the G-sensor is triggered.
Parking Mode recordings are saved in the “Parking” folder. Once the folder has reached its
allocated capacity, the system will automatically record over the oldest video saved under this
folder.
Note: Smart Mode recording is triggered by the G-sensor and motion detected by the front camera. You
can change each sensitivity level by selecting > Parking mode > G-Sensor Sensitivity or
Motion Detection. Low Power Mode recording is triggered by the G-sensor of the device. You
can change the sensitivity level by selecting > Parking mode > G-Sensor Sensitivity.
To exit Parking Mode (and resume continuous loop recording), press . Parking Mode also
exits automatically when vehicle ignition is turned on. You will be prompted to view any saved
recordings.
Capturing a photograph
The dash cam can also be used as a camera to take photographs. Press to capture a still
image. Photos captured by the dash cam are stored in the “Photo” folder.
Bekijk gratis de handleiding van Navman MiVue 180 WIFI, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Navman |
| Model | MiVue 180 WIFI |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2803 MB |
