Native Instruments Kithara handleiding
Handleiding
Je bekijkt pagina 40 van 41
The Modwheel slider affects the parameter values relatively to their original position, in other
words, adjusting the Modwheel slider will modulate the parameter value in a range based on its
original value. The modulation is bipolar: If you drag the modulation icon upwards, the modulation
range will extend above the slider or knob position; if you drag the icon downwards, the modulation
range will extend below the slider or knob position.
You can quickly see which parameters are assigned to the Modwheel slider:
• Sliders: When modulated, the brighter part of the slider’s span shows the modulation range.
• Knobs: If not modulated, knobs have a bright ring. When modulated, the ring becomes darker,
with the brighter part showing the modulation range.
In addition, on each assigned control a small dot shows the current position set by the Modwheel
slider.
Removing parameter assignments
To stop modulating a parameter via the Modwheel slider, you need to remove the parameter
assignment:
1. Open the page and the panel containing the control that you want to unassign.
2. Click the pen icon next to the Modwheel slider to switch to Assign Edit mode.
→ The pen icon lights up, and a modulation icon showing two little up and down arrows appears
next to each assignable control.
3. [Ctrl]-click (Windows) or [command]-click (Mac) the modulation icon near the desired control.
→ The modulation amount is reset to its median zero default value. The control is released from
the modulation and the visual indication of the modulation disappears.
Which parameters can be modulated?
Most continuous controls (sliders or knobs) of Kithara can be assigned to the Modwheel slider,
including:
• The four Layer Volume sliders in the Layer Inspector.
• All the Performance controls except the Expression slider.
• All the continuous controls in the Layers page, with the exception of the Decay and Sustain
controls located in the Shape panel for the Sustain 1 and Sustain 2 layers.
• All the continuous controls in the Fragments page.
• All the continuous controls of the Character effects in the Effects page.
The continuous controls of the Mix effects and those in the Settings page cannot be
assigned to the Modwheel slider. Non-continuous controls (switches, selectors, etc.)
cannot be assigned either.
MOD UL AT ING Y OU R SOUND 38
Bekijk gratis de handleiding van Native Instruments Kithara, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Native Instruments |
| Model | Kithara |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11200 MB |
