Narwal Freo Z10 handleiding
Handleiding
Je bekijkt pagina 11 van 122
The robot will navigate itself back to the base station when cleaning ends. You can view the current cleaning report in
the App.
You can manually end the task in the following three ways:
• Press and hold [Finish] for 2s in the App;
• Short press the [Recall] buon on the robot;
• Short press the [Recall] buon or long press and hold the [Start/Stop] buon on the base station for 2s.
After the last mopping run, the robot will return to the base station for mop washing and drying. The drying time can
be modified in the App.
You can also start mop washing and drying manually in the following two ways:
• Tap [Mop Washing & Drying] in the App;
• Short press [Mop Washing & Drying] buon on the base station.
3.3 Cleaning
The product comes with four built-in cleaning modes: Vacuum, Mop, Vacuum and Mop, and Vacuum then Mop. You can
select and adjust parameters like cleaning cycles, suction, and mop humidity for each mode in the App.
Select cleaning modes
You can pause/resume the current task in three ways:
• Tap [Pause]/ [Resume] in the App;
• Short press the [Start/Stop] buon on the robot;
• Short press the [Start/Stop] buon on the base station.
Pause/resume the current task
If the robot is set for multiple mopping runs or the area for cleaning is large, the robot will automatically return to the
base station for mop washing.
The number of mopping runs and return frequency can be modified in the App before cleaning starts, and the modification
during the current cleaning task will take eect during the next task.
Mop washing
End current task
Mop Drying
The Freo Mind is an intelligent cleaning assistant. When Freo Mind is turned on, the robot will intelligently adjust
cleaning parameters, without needing manual seings.
You can select whether to activate Freo Mind when starting a cleaning task in the App.
Set Freo Mind
After a vacuuming task starts, the base station will transfer dirt and debris within the robot canister to the dust bag in it.
You can also tap dust collection in the App to start dust collection manually.
Dust collection
Start cleaning task
You can start the robot for cleaning in three ways:
• Tap [Start Cleaning] in the App;
• Short press the [Start/Stop] buon on the robot to start cleaning. The robot will activate the Vacuum Mode by
default;
• Short press the [Start/Stop] buon on the base station to start cleaning. The robot will activate the Vacuum and Mop
Mode by default;
Note: You can adjust the cleaning mode and set more cleaning parameters in the App.
10
Bekijk gratis de handleiding van Narwal Freo Z10, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Narwal |
| Model | Freo Z10 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11436 MB |
