Handleiding
Je bekijkt pagina 3 van 10
______________________________________________________________________________________________________________________________
2020 © North American Kitchen Solutions
172 Reaser Court
Elyria, OH 44035
www.naksinc.com
Page 3 of 10
NOTE: The controller must be powered up before or at the
same time as power is supplied to the motor.
Mounted Speed Dial** (Figure 1) – The Perfect Speed control box
interface allows direct control of the motor by turning the onboard
speed dial located to the right of the digital display.
Optional Speed Controller (See Figure 2)
Remote Speed Dial** – (See Figure 2 and 2A) When selected with
this option the fan will come with a control cable and quick connect
Molex plug that can be plugged into the Molex plug on the single
speed potentiometer box***. Set blue speed dial on PerfectSpeed
controller to zero (turn left). Speed B on box is not used for single
speed selection and will not have a dial. The motor will shut o
between 0-1.9V.
Two Speed Dial** – (See Figure 2 & 2B) When selected with this
option the fan will come with a control cable and quick connect
Molex plug that can be plugged into the Molex plug on dual speed
dial. The supplied un-mounted toggle switch will select the Low
(LO) or High (HI) speed on the speed controllers based on the dial
settings. The motor will shut o between 0-1.9v.
Building Control 0-10VDC Wire Kit (See Figure 2 & 2C) Factory
mounted Molex receptacle that allows a quick connection to
supplied 2 wire connector (wires are 3” long).
NOTE: FOR OPTIONAL SPEED CONTROL SET THE BLUE
SPEED DIAL TO 0%.
More information on US Motors perfect speed interface can be
found at: http://www.usmotors.com/Our-Products/ECM-Motors
** Disconnects and Speed Dials are available as mounted on certain fan models and will be wired to motor as shown in Figure 10 for more
information see descriptions on submittals for these items weather they are mounted, not mounted or not available.
*** For extended wiring up to 100 Feet you will need (1) Receptacle Molex 3 1396-R4 with 3 Pin Female Molex 02-09-1119 and (1) Plug
Molex 3 Pin 1396-P1 with Pin Male Molex 02-09-2118 not provided.
FIGURE 1 Mounted Speed Dial
EC MOTOR ONLY
Bekijk gratis de handleiding van NAKS 36D-ECA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | NAKS |
| Model | 36D-ECA |
| Categorie | Afzuigkap |
| Taal | Nederlands |
| Grootte | 1797 MB |
