Handleiding
Je bekijkt pagina 42 van 69
EN - 16
When the timer reaches zero, the oven will
switch off, an audible warning will sound.
The Cooking Time symbol “ ” and “ ” will
flash on the screen. Press any sensor
button on the control unit to stop the
warning sound, “ ” will continue to flash.
Press the “ ” sensor button to exit “ ”
mode.
Adjusting the Cooking End Time
This function is used to begin cooking
after a certain period of time and for a
specific duration of time. Prepare the food
for cooking and put it in the oven. Then,
select the desired cooking function and the
temperature.
Touch the “
” button until you see the
Cooking Time symbol “ ” on the Time
display. Set the required cooking period
using the “+” and “-” sensor. When you
have completed the adjustment the Cooking
Duration Time, touch the “ ” sensor button
until you see the Cooking End Time
symbol “ ” on the Time display. The time of
day and the Cooking End Time symbol “ ”
will flash. Set the required finish time using
the “+” and “-” sensors. When you have
completed the adjustment, wait until the
current time of day is displayed and until
the Cooking End Time symbol “ ” remains
illuminated.
The oven will calculate the operating time
by deducting the cooking period from the
set finishing time, at which it will stop
operating. The timer will give an audible
warning and the Cooking Time symbol “
”
and Cooking End Time symbol “ ” will
flash. Touching any button on the timer will
end the audible warning.
The cooking end time cannot be set
when the grill functions are activated. If
the cooking end time was set before
activating the grill functions, the cooking
end time will be canceled after the grill
functions are selected.
Digital Timer Sound Adjustment
Press and hold the “-” sensor button until
you hear an audible 'beep' sound. After
this, each time the “-” button is pressed,
a different 'beep' tone will sound. There
are four different types of signal sounds. If
"off" is selected, all sounds will be turned
off except alarm and error sounds press
any buttons. After a short time the selected
beep will be recorded.
Key Lock Function
The key lock is used to avoid unintentional
changes being made to the oven settings.
Press and hold the “
” button until you see
the key lock symbol on the display screen.
To deactivate the key lock, press and hold
the “ ” button until the key lock symbol
disappears from the display.
Brightness adjustment
To adjust the display screen brightness,
press and hold the “+” button for 3 seconds.
“br1” will appear on the display screen. After
this, each time the “+” button is pressed, a
different brightness will appear.
4.4 aCCeSSorieS
The EasyFix Wire Rack
Clean the accessories thoroughly with
warm water, detergent and a soft clean
cloth on first use.
7
5
6
4
3
2
1
T2
T1
• Insert the accessory to the correct
position inside the oven.
• Allow at least a 1 cm space between the
fan cover and accessories.
• Take care removing cookware and/or
accessories out of the oven. Hot meals
or accessories can cause burns.
• The accessories may deform with heat.
Once they have cooled down, they will
recover their original appearance and
performance.
• Trays and wire grids can be positioned
on any level from of 1 to 7.
• Telescopic rail can be positioned on
levels T1, T2, 3, 4, 5, 6, 7.
• Level 3 is recommended for single level
cooking.
• Level T2 is recommended for single
level cooking with the telescopic rails.
• Level 2 and Level 4 are recommended
for double level cooking.
• The turnspit wire grid must be
Bekijk gratis de handleiding van Nabo EBO 7575, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Nabo |
| Model | EBO 7575 |
| Categorie | Fornuis |
| Taal | Nederlands |
| Grootte | 6366 MB |
