Handleiding
Je bekijkt pagina 6 van 32
EN - USER MANUAL
6
Important safeguards
• The product is for household use only
• The item should be used only as intended
• Check item carefully before use. Do not switch on heater with defects or damaged cord.
• Placing of the item in water is forbidden.
• Plug in the item only to AC source.
• The appliance should be connected to the same voltage as pointed on the rating label and package
• The heater could be plugged in only grounded socket.
• Do not use non-standard power supply.
• Before plug in the heater, make sure that it is switched off.
• Do not use item outdoors.
• Protect the product from impacts of the sharp corners, high humidity.
• Do not touch heater with wet hands.
• If there is water on the surface of the heater, plug it out immediately.
• If the heater falls in water, plug it out immediately. It is forbidden to put hands in the water.
• Before next use the item should be checked by specialist.
• Always plug the item out after use, before cleaning or if you nd the defects.
• The heater can’t be carried by the cord.
• When you switch off the heater keep your hand on the plug and pull it, do not pull the cord.
• Do not wrap the cord around the appliance after the use.
• Flatten smoothly the cord when you do not use the heater.
• The cord could be changed only in service center.
• Only original spare parts could be used for repair.
• This appliance is not intended for use by persons(including children) with reduced physical,sensory or metal capabilities, or lack of
experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible
for their safety.
Safety instructions
• The appliance should be connected to the same voltage as pointed on the rating label and package.
• Do not plug the item in before its not wall mounted or set on castors.
• Do not cover the item when it is operating.
• Avoid placing foreign objects in air vents.
• It is forbidden to pull and twist the cord.
Before use
• Take the heater out of the box
• Remove the packing material
• Check the installation parts
Installation
• The panel convector heaters should be wall-mounted. Some items can be also set on castors
• Mount castors on the baseboard in accordance with scheme G1. For wall mounting study scheme G2.
• Drill holes in the wall. The diameter of holes should be about 8mm.
• Fix the bracket with screws.
• There should be at least 200mm between the bottom edge of the item and the oor. The distance to any other objects should be at least
200mm from the side and 500mm in front.
• Pay attention to the position of the convector with regard to other objects.
• It is forbidden to place item under the socket.
• The convector has got IP24 degree of protection
• If you place item in bathroom, avoid ingress of water on the surface.
Bekijk gratis de handleiding van N'oveen CH3350, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | N'oveen |
| Model | CH3350 |
| Categorie | Heater |
| Taal | Nederlands |
| Grootte | 3696 MB |
