MuxLab 500790-V2 handleiding
Handleiding
Je bekijkt pagina 24 van 24
Unable to access camera through Browser
Using PC to access the network to test whether the network access can work properly, first
of all, the network fault caused by the PC virus can be eliminated, until the PC and camera
can communicate with each other Ping.
Disconnect the network, connect camera and PC separately, and reset the IP address of
PC.
Check IP address, subnet mask, and gateway settings for camera.
Check whether the MAC address is conflicts.
Check whether the web port is modified. The default web port is 80.
Forget the IP address or login password
Please remember (The default IP address: 192.168.100.88; default user name: admin; default
password: admin).
Remote control cannot control
Check and replace the new battery for the remote controller.
Check whether the camera working mode is correct.
Check whether the address of remote control can match the camera.
Serial port cannot control
Check whether the camera protocol, address and baud rate such is the same.
Check whether the control line is connected well.
USB/IP PTZ Camera 30x Zoom, PoE
500790-V2
Follow us:
2321 Cohen | St-Laurent , H4R 2N7 | Québec, Canada Tel: 514-905-0588 | Fax:
514-905-0589 | Toll free: 1-877-689-5228 info@muxlab.com |
salesteam@muxlab.com | www.muxlab.com
USB/IP PTZ Camera 30x Zoom, PoE
Bekijk gratis de handleiding van MuxLab 500790-V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MuxLab |
| Model | 500790-V2 |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 4220 MB |
