MuxLab 500762-TX handleiding
Handleiding
Je bekijkt pagina 2 van 2
Page 2 © MuxLab Inc. 2017 Page 3
60fps), (e) set the GOP – Group of Pictures (from 5 to 300), (f) set the encoding method (variable
or continuous bitrate), (g) set the URL addresses for the supported communication protocols,
including TS, HLS, FLV (along with HTTP Port# setting), RTSP (along with Port# setting and
Push or Pull mode selection via pulldown tab), RTMP (along with Port# setting and Push or Pull
mode selection via pulldown tab), and Multicast IP (along with Port# selection), (h) enable or
disable each of these communication protocols from a pulldown tab, (i) set the audio bitrate (j) set
the audio code (to AAC, or MP3), and (k) enable or disable the Dip Switches via a pulldown tab.
Click on the “Apply” button to accept changes, or on “Reset” to return to the previous settings.
Network Tab
Click on the Network tab to (a) enable or
disable DHCP via a pulldown tab, (b) set the
device Static IP Address, Subnet Mask and
Gateway, and (c) to get the unit MAC
address.
Click on the “Apply” button to accept
changes, or “Reset” to return to the previous
settings.
Settings Tab
Click on the “Settings” tab to (a) change the
login password, by entering the old
password, new password, and reconfirming
the new password, and clicking on “Apply”,
(b) upgrade the device firmware, by clicking
on the “Choose File” button to search for and
select the new firmware, and then clicking
“Upload”, (c) reset the unit to factory
defaults, by clicking on the “Reset” button,
and (d) reboot the unit, by clicking on the
“Reboot” button.
Log Out Tab
Click on the “Log Out” tab to log out of the
device web interface.
2) 500762-RX
There are several screens to navigate in order to manage the 500762-RX. The first screen shown
after entering the device IP address in the browser is the login screen.
Login
To login to the 500762-RX web interface,
type in the Username and Password, and
then click on “Login”. The default
Username and Password is “admin”.
Info Tab
Click on the “Info” tab to get information
on the 500762-RX, such as the output video
resolution, and the URL addresses for the
supported communication protocols,
including TS, HLS, FLV, RTMP, RTSP,
and Multicast.
Decoder Tab
Click on the “Decoder” tab to (a) set the
output video resolution via a pulldown tab,
(b) set the URL addresses for the supported
communication protocols, including TS,
HLS, FLV, RTMP, RTSP, and Multicast,
(c) enable or disable each communication
protocol from a pulldown tab, and (d)
enable or disable the Dip Switches via a
pulldown tab.
Click on the “Apply” button to accept
changes, or on “Reset” to return to the
previous settings.
Network Tab
Click on the Network tab to (a) enable or
disable DHCP via a pulldown tab, (b) set the
device Static IP Address, Subnet Mask and
Gateway, and (c) to get the unit MAC
address.
Click on the “Apply” button to accept
changes, or “Reset” to return to the previous
settings.
Bekijk gratis de handleiding van MuxLab 500762-TX, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MuxLab |
| Model | 500762-TX |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 768 MB |
