MSW -WOOHS-7HP handleiding
Handleiding
Je bekijkt pagina 37 van 633
EN
• Turn off the engine and place the switch in the locked or off position before servicing,
adjusting, installing accessories or attachments, or storing. Such preventive safety measures
reduce the risk of starting the power tool accidentally.
• Secure logs with the log screw clamping device instead of with your hand or another
individual’s help. This safety precaution allows for proper tool operation using both hands.
• Storing sawmill. When the sawmill is not use, store it in a dry, secure place or keep well
covered and out of the reach of children. Inspect the sawmill for good working condition
prior to storage and before re-use.
• Maintain your sawmill. It is recommended that the general condition of the sawmill be
examined before it is used. Keep your sawmill in good repair by adopting a program of
conscientious repair and maintenance in accordance with the recommended procedures
found in this manual. If any abnormal vibrations or noise occurs, turn the sawmill off
immediately and have the problem corrected before further use.
• Keep saw blades sharp and clean. Properly maintained band saw blades are less likely to bind
and are easier to control.
• Cleaning and Lubrication. Use only soap and a damp cloth to clean your sawmill.
Many household cleaners are harmful to plastic and rubber components on the sawmill.
• Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for another sawmill may create a risk of injury when used
on the sawmill.
• Always operate machine with all safety devices and guards in place and in working order. DO
NOT modify or make changes to safety devices. DO NOT operate machine if any safety
devices or guards are missing or inoperative.
• Never leave sawmill running unattended.
• Coiled blades can spring apart with considerable force and unpredictably in any direction.
Always deal with coiled blades, including those packaged in boxes, with the utmost care.
• Never use the equipment to cut anything other than lumber or for any purpose other than
cutting lumber as described in this manual.
START UP PROCEDURE – EQUIPMENT OPERATION
1. Wear heavy-duty work gloves, ANSI-approved goggles behind a full-face shield, steel-toed
work boots, and a dust mask.
2. Operate only with assistance.
3. Ensure guide blocks are tight and track is level.
4. Fill the lubrication tank with clean water and washing up detergent.
5. Start and operate the engine.
6. Cut branches off the lumber to be processed.
7. WARNING: To avoid death or serious injury, Do not cut lumber with foreign objects in it such
as nails, any metal pieces, etc.
8. Place the lumber to be cut on the supports.
9. WARNING: The operator and any assistants must stay clear of the front and back of the blade
whenever the engine is ON.
10. Move the saw head slowly along the track and against the lumber to make the cut.
11. Trim off the rounded sides of the log.
12. When the log is squared-off, boards or posts can be cut to custom specifications.
GENERAL MAINTENANCE INFORMATION
Proper and routine maintenance is critical to operator safety, achieving good milling
results and to prolonging the life of your investment.
Bekijk gratis de handleiding van MSW -WOOHS-7HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -WOOHS-7HP |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 628915 MB |
