MSW -SWG-SW01A handleiding
Handleiding
Je bekijkt pagina 9 van 80
EN
I. Product structure
1. Heating board
2. Connection
3. Insulation
4. Radiator
5. Support
6. Screw
7. Machine body
8. Circuit board
9. Wire clip
10. Connecting screw
11. Wire handle
12. Cable
II. Using
1. Set up the machine
Place the machine on a stable, flat surface. Install the appropriate heating sockets based on the required specifications.
Secure the heating sockets tightly to the board using a wrench. Typically, smaller sockets should be positioned at the
front of the heating board.
2. Power on the machine
Turn on the power. Caution: Ensure the power supply is grounded. A red indicator light will show that the machine is
heating. When the green indicator light appears, the machine has reached the correct temperature and is ready for use.
Use the Shift
⬅, Up ⬆ and Down ⬇, keys to adjust the temperature and confirm with “SET” button.
3. Prepare and heat the pipe
a. Cut the pipe to the desired length.
b. Insert the pipe or fitting into the heating heads for the specified heating time (see the table below for details).
Bekijk gratis de handleiding van MSW -SWG-SW01A, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -SWG-SW01A |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 29516 MB |
