MSW -MHB-135-PRO handleiding
Handleiding
Je bekijkt pagina 5 van 27
PLEASE NOTE!
Drawings in this manual are for illustration purposes only and in some details it may differ from the actual
product. The original operation manual is in German. Other language versions are translations from German.
1. Before commencing with the work, make sure to read carefully and understand this operation manual!
All safety recommendations must be followed in order to avoid possible damages as a result of
improper use of the equipment.
2. Keep the instructions for future reference. If the machine is to be handed over to a third party, this
operation manual must also be handed over with the machine.
3. If the machine is operated contrary to its intended use or in case of improper handling of the machine,
the manufacturer's liability for possible damage is excluded.
4. The machine can be operated by physically t persons who have read this operating manual and who
are also familiar with the occupational health and safety requirements.
5. The machine is not designed to be handled by persons (including children) with limited physical,
sensory and mental abilities, or by persons lacking appropriate experience and/or knowledge, unless
they are supervised by a person responsible for their safety or if they have received instructions on
how to operate the machine
II. SAFE OPERATION PRINCIPLES / WARNINGS
1. Read this operation manual and the safety instructions prior to each use of the machine.
2. Before each use, the machine must be checked for possible damages that can result in a failure. This machine
must not be operated if its parts are worn out or damaged in a way that prevents proper operation.
3. If the machine has been overloaded or subject to strong shock/vibrations, it must be inspected by a
qualied service technician before commencing any work on the machine.
4. This machine must not be operated if it is damaged, worn out or if it does not work properly. If such
condition occurs the machine must be handed over to an authorized service center for inspection and
repair.
5. Comprehensive periodic inspections of the machine must be carried out and worn out/damaged parts
must be always replaced.
6. Do not dismount or replace any parts of the machine.
7. Use only original replacement parts, as recommended by the manufacturer.
8. This machine may only be handled by persons properly trained in safety regulations and physically able
to operate the machine.
9. Do not overload the machine with a load exceeding the maximum admissible load.
10. Do not hit the lift or the load.
11. Third parties must be warned about operation of the machine and stay at a safe distance.
12. Do not lift people or animals using this machine.
13. Do not lift the load using the machine over people or animals.
14. Always pay attention to the load.
The operation manual must be read carefully.
The product satises the relevant safety standards.
The product must be recycled.
Attention! Make sure that third parties keep distance from the area.
Attention! Risk accident
Caution, the hand can be squeezed!
Attention! Wear protective helmet.
Wear work boots (Anti-slip).
Attention! Wear protective gloves.
I. SAFETY RECOMMENDATIONS
15. Do not leave the load without supervision.
16. Never exceed the permissible lifting capacity.
17. Never store the machine with a payload attached to it.
18. Lift only one load at a time.
19. No modications should be made to the machine
20. After completion of the operation, the machine must be secured against unauthorized use.
21. The machine must be regularly inspected and its damaged or worn out and torn parts must be
replaced with new ones by an authorized service.
22. If the load falls, there is a risk of death or injury.
23. If the lift table remains unused for a long period of time, make sure it is clean and free from stains and
that the platform is in the lowest position. Avoid contact with moisture, wipe dry if needed and grease
all articulated parts.
24. Always secure the load with a chain.
25. The device should only be used on a at and level surface, with appropriate load bearing rating.
26. The load should always be correctly balanced. Follow motorcycle manufacturer’s instructions for lifting
points.
27. Do not move / transport the lift table with a load on it! The lift table may be moved / transported only
without a load.
28. Keep limbs away from the operating area.
29. Do not modify the device. Do not use the device if any parts are deformed, damaged cracked or if
other faults occur which prevent correct operation.
30. Make sure all the bolts are securely tightened prior to use.
31. Do not use the device outdoor during heavy wind.
Failure to follow safety recommendations and instructions may result in serious injuries or death!
III. INTENDED USE OF THE MACHINE
The motorcycle lift is designed for lifting motorcycles. Do not use the lift table for any other purpose.
The user is responsible for any damages resulting from a non-conform use of the device!
IV. TECHNICAL SPECIFICATIONS
Product name Motorcycle lift
Model MSW-
MHB-360-780
MSW-
MHB-450-680
MSW-
MHB-135
MSW-
MHB-135-PRO
MSW-
MHB-150
MSW
-MHB-150-PRO
Maximum loading (kg) 360 450 135 135 150 150
Maximum height (cm) 78 68 87 87 87 87
Minimum height (cm) 21 18 35 35 35 35
Weight (kg) 104,5 102 2 24 27 28
Table size (cm) 175x50 190x53 41x35 41x35 41x35 41x35
Ramp size (cm) 45x50 42x53 - - - -
USER MANUAL
8 9
Rev. 23.03.2020
Rev. 23.03.2020
Bekijk gratis de handleiding van MSW -MHB-135-PRO, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -MHB-135-PRO |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7314 MB |
