MSW -ISU-TECH handleiding
Handleiding
Je bekijkt pagina 20 van 136
EN
3.4.4. Cylindrical Cutting and Conical Cutting
You can fit circle cutting attachment 2 on the Extension 16 (Figure1) to cut out the cylinder or the cone. By
controlling foot switch 1 (Figure 7 and Figure 8) and then releasing your hands to turn the workpiece, the
cylinder or cone can be cut out accurately.
Figure 7
Figure 8
Hints:
• The wire has a higher temperature at the exit side of the workpiece, which may cause surface
melting. To prevent this, the wire can be cooled by blowing on it.
• The cutting wire normally breaks above the guide bushing. Insert the wire a few inches further in
the lower wire guide and fasten it again to prevent the wire from breaking. Do it at regular
intervals.
3.5. Cleaning and maintenance
a) Unplug the mains plug and allow the device to cool completely before each cleaning, adjustment or
replacement of accessories, or if the device is not being used.
b) Use only non-corrosive cleaners to clean the surface.
c) After cleaning the device, all parts should be dried completely before using it again.
d) Store the unit in a dry, cool place, free from moisture and direct exposure to sunlight.
e) Do not spray the device with a water jet or submerge it in water.
f) Do not allow water to get inside the device through vents in the housing of the device.
g) Clean the vents with a brush and compressed air.
h) The device must be regularly inspected to check its technical efficiency and spot any damage.
i) Use a soft, damp cloth for cleaning.
j) Do not use sharp and/or metal objects for cleaning (e.g. a wire brush or a metal spatula) because they
may damage the surface material of the appliance.
k) Do not clean the device with an acidic substance, agents of medical purposes, thinners, fuel, oils or
other chemical substances because it may damage the device.
DISPOSING OF USED DEVICES:
Do not dispose of this device in municipal waste systems. Hand it over to an electric and electrical device
recycling and collection point. Check the symbol on the product, instruction manual and packaging. The
plastics used to construct the device can be recycled in accordance with their markings. By choosing to
recycle you are making a significant contribution to the protection of our environment.
Contact local authorities for information on your local recycling facility.
Bekijk gratis de handleiding van MSW -ISU-TECH, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | MSW |
| Model | -ISU-TECH |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 25293 MB |
